Festo
Quarter turn actuator, double-acting, 720 Nm, size 0720, flange F10/F12 DAPS-0720-090-R-F1012-T4 - Festo 8030610
Item FES-8030610
€1,123.60
Images are examples, some edited with AI. The technical data are authoritative. AI notice
Quarter turn actuator, double-acting, 720 Nm, size 0720, flange F10/F12 DAPS-0720-090-R-F1012-T6 - Festo 553181
The DAPS-0720-090-R-F1012-T6 turns ball valves and butterfly valves with flange F10/F12 in both directions using compressed air. At 5.6 bar nominal pressure the T27 shaft delivers 360 to 720 Nm. Approvals and rating: ATEX II 2G/2D, suitable up to SIL 2 Low Demand, CRC 3.
Net
excl. VAT
€1,303.52
Item
FES-553181
Manufacturer no.
DAPS-0720-090-R-F1012-T6
- Specialist dealer since 2009
- Invoice payment for regular customers
- Worldwide shipping
- Technical questions clarified with the manufacturer
Description
With up to 720 Nm at 5.6 bar nominal pressure, the size 0720 DAPS operates ball valves and butterfly valves with flange pattern F10/F12. Flange pattern F10/F12 to ISO 5211 and shaft connection T27, depth 29.5 mm fit directly onto the valve top.
Benefits
- 360 to 720 Nm torque across the 90° swivel angle at 5.6 bar
- Valve interface to ISO 5211: flange F10/F12, shaft connection T27
- Valve interface to VDI/VDE 3845 (NAMUR) for direct mounting of a solenoid valve
- For hazardous areas: ATEX II 2G and II 2D, ignition protection Ex h IIC T6...T3 Gb X
- End position at 0° adjustable by -1 to 9°
- Suitable for safety-related control systems (SRP/CS) up to SIL 2 Low Demand
Applications
Typical tasks are on/off actuation of ball valves, butterfly valves and plug valves with top flange F10/F12. For hazardous areas: the actuator with flange F10/F12 is rated ATEX II 2G/2D for zones 1 and 2 as well as zones 21 and 22. The operating medium is compressed air to ISO 8573-1:2010 [7:4:4] within 3 to 8.4 bar, nominal pressure 5.6 bar. For sizing the valve bracket: product weight 12 kg.
Technical data
| Order code | DAPS-0720-090-R-F1012-T6 |
|---|---|
| Festo part number | 553181 |
| Size of valve actuator | 0720 |
| Flange hole pattern | F10, F12 |
| Swivel angle | 90° |
| End-position adjustment range at 0° | -1 to 9° |
| Shaft connection depth | 29.5 mm |
| Fitting connection conforms to standard | ISO 5211 |
| Cushioning | no cushioning |
| Mounting position | any |
| Mode of operation | double-acting |
| Design | Scotch yoke |
| Position detection | none |
| Closing direction | closes to the right |
| Valve connection conforms to standard | VDI/VDE 3845 (NAMUR) |
| Safety Integrity Level (SIL) | product can be used in SRP/CS up to SIL 2 Low Demand, product can be used in SRP/CS up to SIL 2 High Demand |
| Operating pressure | 3 to 8.4 bar |
| Nominal operating pressure | 5.6 bar |
| CE mark (see declaration of conformity) | to EU Explosion Protection Directive (ATEX) |
| ATEX category gas | II 2G |
| ATEX category dust | II 2D |
| Explosion ignition protection type for gas | Ex h IIC T6...T3 Gb X |
| Explosion ignition protection type for dust | Ex h IIIC T85°C...T200°C Db X |
| Explosion ambient temperature | -50 to 60 °C |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
| Note on operating and pilot medium | lubricated operation possible (then required for further operation) |
| Corrosion resistance class CRC | 3 - high corrosion stress |
| Ambient temperature | -50 to 60 °C |
| Torque at nominal operating pressure and 0° swivel angle | 720 Nm |
| Torque at nominal operating pressure and 50° swivel angle | 360 Nm |
| Torque at nominal operating pressure and 90° swivel angle | 540 Nm |
| Note on torque | The operating torque of the actuator must not exceed the maximum permissible torque listed in ISO 5211 for the size of the mounting flange and coupling |
| Air consumption at 6 bar per cycle 0°-90°-0° | 24.5 l |
| Product weight | 12000 g |
| Shaft connection | T27 |
| Pneumatic connection | G1/4 |
| Note on materials | contains paint-wetting impairment substances (PWIS), RoHS compliant |
| Material cover | wrought aluminium alloy |
| Material seals | FVMQ, PTFE-reinforced |
| Material housing | wrought aluminium alloy |
| Material screws | high-alloy steel |
| Material shaft | high-alloy steel |
| Material number shaft | 1.4305 |
| Weight | 12 kg |
| Manufacturer | Festo |
| Hersteller-Nr | DAPS-0720-090-R-F1012-T6 |
| EAN | 4052568195595 |
| Zolltarifnummer | 84123900 |
| GPSR Herstellerdaten | Festo Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
| Material | Aluminium |
| Thread | G 1/4 |
| Seal material | FVMQ, PTFE-reinforced |
| Medium | Compressed air |
| Function | double-acting |
| Actuation type | pneumatic |
| Norm | ISO 5211, VDI/VDE 3845 |
| Certification | ATEX |
| Operating conditions | ISO 8573-1 |
| Series | DAPS |
| Betriebsdruck max [bar] | 8.4 |
| Temperature (max.) | 60 |
Downloads
Accessories
Festo
Quarter turn actuator, double-acting, 720 Nm, size 0720, flange F10/F12 DAPS-0720-090-R-F1012-MW - Festo 8005007
Item FES-8005007
€1,740.26
Festo
Quarter turn actuator, double-acting, 720 Nm, size 0720, flange F10/F12 DAPS-0720-090-R-F1012-MW-T6 - Festo 8005019
Item FES-8005019
€1,942.76
Festo
Quarter-turn actuator, double-acting, 720 Nm, flange F10/F12, ATEX DAPS-0720-090-R-F1012 - Festo 549667
Item FES-549667
€1,087.88
Festo
Quarter-turn actuator, single-acting, spring return, flange F12, ATEX DAPS-0720-090-RS2-F12-T6 - Festo 553203
Item FES-553203
€2,733.95
Festo
Quarter turn actuator, single-acting, spring return, size 0720, flange F14 DAPS-0720-090-RS2-F14-T6 - Festo 553204
Item FES-553204
€2,733.95
Questions about this item
Any other question?
Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.