Festo
Quarter turn actuator, double-acting, 720 Nm, size 0720, flange F10/F12 DAPS-0720-090-R-F1012-MW - Festo 8005007
Item FES-8005007
€1,740.26
Images are examples, some edited with AI. The technical data are authoritative. AI notice
Quarter turn actuator, double-acting, 720 Nm, size 0720, flange F10/F12 DAPS-0720-090-R-F1012-MW-T6 - Festo 8005019
The DAPS-0720-090-R-F1012-MW-T6 turns ball valves and butterfly valves with flange F10/F12 in both directions using compressed air. At 5.6 bar nominal pressure it reaches 360 to 720 Nm across its 92° swivel range. Approvals and rating: ATEX II 2G/2D, suitable up to SIL 2 Low Demand, CRC 2.
Net
excl. VAT
€1,942.76
Item
FES-8005019
Manufacturer no.
DAPS-0720-090-R-F1012-MW-T6
- Specialist dealer since 2009
- Invoice payment for regular customers
- Worldwide shipping
- Technical questions clarified with the manufacturer
Description
With up to 720 Nm at 5.6 bar nominal pressure, the size 0720 DAPS operates ball valves and butterfly valves with flange pattern F10/F12. It mounts via the F10/F12 hole pattern to ISO 5211, the T27 shaft, depth 29.5 mm engages the valve stem.
Benefits
- 360 to 720 Nm torque across the 92° swivel angle at 5.6 bar
- Valve interface to ISO 5211: flange F10/F12, shaft connection T27
- Valve interface to VDI/VDE 3845 (NAMUR) for direct mounting of a solenoid valve
- For hazardous areas: ATEX II 2G and II 2D, ignition protection Ex h IIC T6...T3 Gb X
- Corrosion resistance class CRC 2
- Air consumption 32.2 l per switching cycle at 6 bar
Applications
The DAPS is intended for quarter-turn valves with top flange F10/F12, such as ball valves and butterfly valves in process plants. ATEX category II 2G/2D permits use of the DAPS-0720 in zones 1 and 2 as well as zones 21 and 22. The operating medium is compressed air to ISO 8573-1:2010 [7:4:4] within 3 to 8.4 bar, nominal pressure 5.6 bar. The product weight is 17.8 kg.
Technical data
| Order code | DAPS-0720-090-R-F1012-MW-T6 |
|---|---|
| Festo part number | 8005019 |
| Size of valve actuator | 0720 |
| Flange hole pattern | F10, F12 |
| Swivel angle | 92° |
| Shaft connection depth | 29.5 mm |
| Fitting connection conforms to standard | ISO 5211 |
| Cushioning | no cushioning |
| Mounting position | any |
| Mode of operation | double-acting |
| Design | Scotch yoke |
| Position detection | none |
| Closing direction | closes to the right |
| Valve connection conforms to standard | VDI/VDE 3845 (NAMUR) |
| Safety Integrity Level (SIL) | product can be used in SRP/CS up to SIL 2 Low Demand, product can be used in SRP/CS up to SIL 2 High Demand |
| Operating pressure | 3 to 8.4 bar |
| Nominal operating pressure | 5.6 bar |
| CE mark (see declaration of conformity) | to EU Explosion Protection Directive (ATEX) |
| ATEX category gas | II 2G |
| ATEX category dust | II 2D |
| Explosion ignition protection type for gas | Ex h IIC T6...T3 Gb X |
| Explosion ignition protection type for dust | Ex h IIIC T85°C...T200°C Db X |
| Explosion ambient temperature | -50 to 60 °C |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
| Note on operating and pilot medium | lubricated operation possible (then required for further operation) |
| Corrosion resistance class CRC | 2 - moderate corrosion stress |
| Ambient temperature | -50 to 60 °C |
| Torque at nominal operating pressure and 0° swivel angle | 720 Nm |
| Torque at nominal operating pressure and 50° swivel angle | 360 Nm |
| Torque at nominal operating pressure and 90° swivel angle | 540 Nm |
| Air consumption at 6 bar per cycle 0°-90°-0° | 32.2 l |
| Product weight | 17800 g |
| Shaft connection | T27 |
| Pneumatic connection | G1/4 |
| Note on materials | contains paint-wetting impairment substances (PWIS), RoHS compliant |
| Material cover | wrought aluminium alloy |
| Material seals | FVMQ, PTFE-reinforced |
| Material housing | wrought aluminium alloy |
| Material screws | high-alloy steel |
| Material shaft | high-alloy steel |
| Material number shaft | 1.4305 |
| Weight | 18 kg |
| Manufacturer | Festo |
| Hersteller-Nr | DAPS-0720-090-R-F1012-MW-T6 |
| EAN | 4052568256685 |
| Zolltarifnummer | 84123900 |
| GPSR Herstellerdaten | Festo Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
| Material | Aluminium |
| Thread | G 1/4 |
| Seal material | FVMQ, PTFE-reinforced |
| Medium | Compressed air |
| Function | double-acting |
| Actuation type | pneumatic |
| Norm | ISO 5211, VDI/VDE 3845 |
| Certification | ATEX |
| Operating conditions | ISO 8573-1 |
| Series | DAPS |
| Betriebsdruck max [bar] | 8.4 |
| Temperature (max.) | 60 |
Downloads
Accessories
Festo
Quarter turn actuator, double-acting, 720 Nm, size 0720, flange F10/F12 DAPS-0720-090-R-F1012-T4 - Festo 8030610
Item FES-8030610
€1,123.60
Festo
Quarter turn actuator, double-acting, 720 Nm, size 0720, flange F10/F12 DAPS-0720-090-R-F1012-T6 - Festo 553181
Item FES-553181
€1,303.52
Festo
Quarter-turn actuator, double-acting, 720 Nm, flange F10/F12, ATEX DAPS-0720-090-R-F1012 - Festo 549667
Item FES-549667
€1,087.88
Festo
Quarter-turn actuator, single-acting, spring return, flange F12, ATEX DAPS-0720-090-RS1-F12-MW - Festo 8005058
Item FES-8005058
€3,098.93
Festo
Quarter-turn actuator, single-acting, spring return, flange F14, ATEX DAPS-0720-090-RS1-F14-MW - Festo 8005059
Item FES-8005059
€3,098.93
Questions about this item
Any other question?
Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.