Semi-Rotary Drive DAPS-0106-090-R-F0507-T4 - Festo 8030605

Images are examples, some edited with AI. The technical data are authoritative. AI notice

Quarter turn actuator, double-acting, 106 Nm, size 0106, flange F07/F05 DAPS-0106-090-R-F0507-T4 - Festo 8030605

Name: Quarter turn actuator, double-acting, 106 Nm, size 0106, flange F07/F05 DAPS-0106-090-R-F0507-T4 - Festo 8030605
Brand: Festo
SKU: FES-8030605
Price: 310.17 EUR
Availability: InStock

Festo ✓ Original product Brand new

The DAPS-0106-090-R-F0507-T4 turns ball valves and butterfly valves with flange F07/F05 in both directions using compressed air. Torque 53 to 106 Nm at 5.6 bar, swivel angle 90°. Approvals and rating: ATEX II 2G/2D, suitable up to SIL 2 Low Demand, CRC 3. Weight 2.5 kg.

Net

€310.17

excl. VAT

Item FES-8030605

Manufacturer no. DAPS-0106-090-R-F0507-T4

Question about this item

Datasheet (PDF)

Specialist dealer since 2009
Invoice payment for regular customers
Worldwide shipping
Technical questions clarified with the manufacturer

Description

The double-acting DAPS-0106-090-R-F0507-T4 turns process valves in both directions with compressed air and delivers 53 to 106 Nm at 5.6 bar. It mounts via the F07/F05 hole pattern to ISO 5211, the T17 shaft, depth 19.3 mm engages the valve stem.

Benefits

53 to 106 Nm torque across the 90° swivel angle at 5.6 bar
Valve interface to ISO 5211: flange F07/F05, shaft connection T17
Valve interface to VDI/VDE 3845 (NAMUR) for direct mounting of a solenoid valve
For hazardous areas: ATEX II 2G and II 2D, ignition protection Ex h IIC T6...T3 Gb X
End position at 0° adjustable by -1 to 9°
Suitable for safety-related control systems (SRP/CS) up to SIL 2 Low Demand

Applications

The DAPS is intended for quarter-turn valves with top flange F07/F05, such as ball valves and butterfly valves in process plants. For hazardous areas: the actuator with flange F07/F05 is rated ATEX II 2G/2D for zones 1 and 2 as well as zones 21 and 22. The operating medium is compressed air to ISO 8573-1:2010 [7:4:4] within 3 to 8.4 bar, nominal pressure 5.6 bar. The product weight is 2.5 kg.

Technical data

Order code	DAPS-0106-090-R-F0507-T4
Festo part number	8030605
Size of valve actuator	0106
Flange hole pattern	F07, F05
Swivel angle	90°
End-position adjustment range at 0°	-1 to 9°
Shaft connection depth	19.3 mm
Fitting connection conforms to standard	ISO 5211
Cushioning	no cushioning
Mounting position	any
Mode of operation	double-acting
Design	Scotch yoke
Position detection	none
Closing direction	closes to the right
Valve connection conforms to standard	VDI/VDE 3845 (NAMUR)
Safety Integrity Level (SIL)	product can be used in SRP/CS up to SIL 2 Low Demand, product can be used in SRP/CS up to SIL 2 High Demand
Operating pressure	3 to 8.4 bar
Nominal operating pressure	5.6 bar
CE mark (see declaration of conformity)	to EU Explosion Protection Directive (ATEX)
ATEX category gas	II 2G
ATEX category dust	II 2D
Explosion ignition protection type for gas	Ex h IIC T6...T3 Gb X
Explosion ignition protection type for dust	Ex h IIIC T85°C...T200°C Db X
Explosion ambient temperature	-20 to 150 °C
Operating medium	Compressed air to ISO 8573-1:2010 [7:4:4]
Note on operating and pilot medium	lubricated operation possible (then required for further operation)
Corrosion resistance class CRC	3 - high corrosion stress
Ambient temperature	-20 to 150 °C
Torque at nominal operating pressure and 0° swivel angle	106 Nm
Torque at nominal operating pressure and 50° swivel angle	53 Nm
Torque at nominal operating pressure and 90° swivel angle	80 Nm
Note on torque	The operating torque of the actuator must not exceed the maximum permissible torque listed in ISO 5211 for the size of the mounting flange and coupling
Air consumption at 6 bar per cycle 0°-90°-0°	3.85 l
Product weight	2500 g
Shaft connection	T17
Pneumatic connection	G1/8
Note on materials	contains paint-wetting impairment substances (PWIS), RoHS compliant
Material cover	wrought aluminium alloy
Material seals	FKM, PTFE-reinforced
Material housing	wrought aluminium alloy
Material screws	high-alloy steel
Material shaft	high-alloy steel
Material number shaft	1.4305
Weight	2.6 kg
Manufacturer	Festo
Hersteller-Nr	DAPS-0106-090-R-F0507-T4
EAN	4052568280659
Zolltarifnummer	84123900
GPSR Herstellerdaten	Festo Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com
Artikelzustand	New
Artikel-Authentizität	Original product
Material	Aluminium
Thread	G 1/8
Seal material	FKM, PTFE-reinforced
Medium	Compressed air
Function	double-acting
Actuation type	pneumatic
Norm	ISO 5211, VDI/VDE 3845
Certification	ATEX
Operating conditions	ISO 8573-1
Series	DAPS
Betriebsdruck max [bar]	8.4
Temperaturbereich	-20-150 °C
Temperature (max.)	150