Festo
Quarter turn actuator, single-acting, spring return, size 0090, flange F07/F10 DAPS-0090-090-RS4-F0710-T4 - Festo 8030618
Item FES-8030618
€487.76
Images are examples, some edited with AI. The technical data are authoritative. AI notice
Quarter turn actuator, single-acting, spring return, size 0090, flange F07/F10 DAPS-0090-090-RS4-F0710-MW - Festo 8005033
The DAPS-0090-090-RS4-F0710-MW returns ball valves and butterfly valves with flange F07/F10 to ISO 5211 to their home position by spring force. Air torque 45 to 90 Nm at 5.6 bar, spring return torque 45 to 90 Nm. Approvals and rating: ATEX II 2G/2D, suitable up to SIL 2 Low Demand, CRC 2.
Net
excl. VAT
€928.63
Item
FES-8005033
Manufacturer no.
DAPS-0090-090-RS4-F0710-MW
- Specialist dealer since 2009
- Invoice payment for regular customers
- Worldwide shipping
- Technical questions clarified with the manufacturer
Description
For on/off valves with a safety position: the DAPS-0090-090-RS4-F0710-MW is single-acting with spring return and reaches up to 90 Nm at 5.6 bar. Flange pattern F07/F10 to ISO 5211 and shaft connection T22, depth 24.8 mm fit directly onto the valve top.
Benefits
- 45 to 90 Nm with compressed air (5.6 bar) and 45 to 90 Nm from the spring set
- Safety position by spring force if air supply fails, operating pressure 5.6 to 8.4 bar
- Valve interface to ISO 5211: flange F07/F10, shaft connection T22
- Valve interface to VDI/VDE 3845 (NAMUR) for direct mounting of a solenoid valve
- For hazardous areas: ATEX II 2G and II 2D, ignition protection Ex h IIC T6...T3 Gb X
- Corrosion resistance class CRC 2
Applications
Typical tasks are on/off actuation of ball valves, butterfly valves and plug valves with top flange F07/F10. For hazardous areas: the actuator with flange F07/F10 is rated ATEX II 2G/2D for zones 1 and 2 as well as zones 21 and 22. The DAPS-0090-090-RS4-F0710-MW runs on compressed air to ISO 8573-1:2010 [7:4:4] within 5.6 to 8.4 bar. The product weight is 6.8 kg.
Technical data
| Order code | DAPS-0090-090-RS4-F0710-MW |
|---|---|
| Festo part number | 8005033 |
| Size of valve actuator | 0090 |
| Flange hole pattern | F07, F10 |
| Swivel angle | 92° |
| Shaft connection depth | 24.8 mm |
| Fitting connection conforms to standard | ISO 5211 |
| Cushioning | no cushioning |
| Mounting position | any |
| Mode of operation | single-acting |
| Design | Scotch yoke |
| Position detection | none |
| Closing direction | closes to the right |
| Valve connection conforms to standard | VDI/VDE 3845 (NAMUR) |
| Safety Integrity Level (SIL) | product can be used in SRP/CS up to SIL 2 Low Demand, product can be used in SRP/CS up to SIL 2 High Demand |
| Operating pressure | 5.6 to 8.4 bar |
| Nominal operating pressure | 5.6 bar |
| CE mark (see declaration of conformity) | to EU Explosion Protection Directive (ATEX) |
| ATEX category gas | II 2G |
| ATEX category dust | II 2D |
| Explosion ignition protection type for gas | Ex h IIC T6...T3 Gb X |
| Explosion ignition protection type for dust | Ex h IIIC T85°C...T200°C Db X |
| Explosion ambient temperature | -50 to 60 °C |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
| Note on operating and pilot medium | lubricated operation possible (then required for further operation) |
| Corrosion resistance class CRC | 2 - moderate corrosion stress |
| Ambient temperature | -20 to 80 °C |
| Torque at nominal operating pressure and 0° swivel angle | 90 Nm |
| Torque at nominal operating pressure and 50° swivel angle | 45 Nm |
| Torque at nominal operating pressure and 90° swivel angle | 60 Nm |
| Air consumption at 6 bar per cycle 0°-90°-0° | 3.85 l |
| Product weight | 6800 g |
| Shaft connection | T22 |
| Pneumatic connection | G1/8 |
| Note on materials | RoHS compliant |
| Material cover | wrought aluminium alloy |
| Material seals | FKM, NBR, PUR |
| Material housing | wrought aluminium alloy |
| Material screws | high-alloy steel |
| Material shaft | high-alloy steel |
| Material number shaft | 1.4305 |
| Note on end-position adjustment | one end position adjustable as required |
| Supply pressure for spring set | 5.6 bar |
| Spring return torque at 0° swivel angle | 60 Nm |
| Spring return torque at 50° swivel angle | 45 Nm |
| Spring return torque at 90° swivel angle | 90 Nm |
| Spring set | 4 |
| Weight | 9 kg |
| Manufacturer | Festo |
| Hersteller-Nr | DAPS-0090-090-RS4-F0710-MW |
| EAN | 4052568256821 |
| Zolltarifnummer | 84123900 |
| GPSR Herstellerdaten | Festo Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
| Material | Aluminium |
| Thread | G 1/8 |
| Seal material | FKM, NBR, PUR |
| Medium | Compressed air |
| Function | single-acting |
| Actuation type | pneumatic |
| Norm | ISO 5211, VDI/VDE 3845 |
| Certification | ATEX |
| Operating conditions | ISO 8573-1 |
| Series | DAPS |
| Betriebsdruck max [bar] | 8.4 |
| Temperaturbereich | -20-80 °C |
| Temperature (max.) | 80 |
Downloads
Accessories
Festo
Quarter-turn actuator, single-acting, spring return, flange F07/F10, ATEX DAPS-0090-090-RS4-F0710 - Festo 533442
Item FES-533442
€472.24
Festo
Quarter turn actuator, single-acting, spring return, size 0090, flange F07/F10 DAPS-0090-090-RS3-F0710-MW - Festo 8005032
Item FES-8005032
€921.55
Festo
Quarter turn actuator, single-acting, spring return, size 0090, flange F07/F10 DAPS-0090-090-RS2-F0710-MW - Festo 8005031
Item FES-8005031
€921.55
Festo
Quarter turn actuator, single-acting, spring return, size 0090, flange F07/F10 DAPS-0090-090-RS1-F0710-MW - Festo 8005030
Item FES-8005030
€921.55
Questions about this item
Any other question?
Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.