Images are examples, some edited with AI. The technical data are authoritative. AI notice
Quarter turn actuator, single-acting, spring return, size 0090, flange F07/F10 DAPS-0090-090-RS2-F0710-MW - Festo 8005031
Single-acting quarter turn actuator with Scotch yoke mechanism for process valves with flange pattern F07/F10 to ISO 5211. At 5.6 bar nominal pressure the air stroke delivers 61.9 to 112.6 Nm, the spring returns with 28.1 to 56.3 Nm. Weight 6.8 kg.
- Specialist dealer since 2009
- Invoice payment for regular customers
- Worldwide shipping
- Technical questions clarified with the manufacturer
Description
If the compressed air fails, the spring set of the DAPS-0090-090-RS2-F0710-MW turns the valve into the defined position with at least 28.1 Nm spring torque. It mounts via the F07/F10 hole pattern to ISO 5211, the T22 shaft, depth 24.8 mm engages the valve stem.
Benefits
- Air torque 61.9 to 112.6 Nm at 5.6 bar, spring return torque 28.1 to 56.3 Nm
- Safety position by spring force if air supply fails, operating pressure 3.5 to 8.4 bar
- Valve interface to ISO 5211: flange F07/F10, shaft connection T22
- Valve interface to VDI/VDE 3845 (NAMUR) for direct mounting of a solenoid valve
- For hazardous areas: ATEX II 2G and II 2D, ignition protection Ex h IIC T6...T3 Gb X
- Corrosion resistance class CRC 2
Applications
Typical tasks are on/off actuation of ball valves, butterfly valves and plug valves with top flange F07/F10. For hazardous areas: the actuator with flange F07/F10 is rated ATEX II 2G/2D for zones 1 and 2 as well as zones 21 and 22. The operating medium is compressed air to ISO 8573-1:2010 [7:4:4] within 3.5 to 8.4 bar, nominal pressure 5.6 bar. For sizing the valve bracket: product weight 6.8 kg.
Technical data
| Order code | DAPS-0090-090-RS2-F0710-MW |
|---|---|
| Festo part number | 8005031 |
| Size of valve actuator | 0090 |
| Flange hole pattern | F07, F10 |
| Swivel angle | 92° |
| Shaft connection depth | 24.8 mm |
| Fitting connection conforms to standard | ISO 5211 |
| Cushioning | no cushioning |
| Mounting position | any |
| Mode of operation | single-acting |
| Design | Scotch yoke |
| Position detection | none |
| Closing direction | closes to the right |
| Valve connection conforms to standard | VDI/VDE 3845 (NAMUR) |
| Safety Integrity Level (SIL) | product can be used in SRP/CS up to SIL 2 Low Demand, product can be used in SRP/CS up to SIL 2 High Demand |
| Operating pressure | 3.5 to 8.4 bar |
| Nominal operating pressure | 5.6 bar |
| CE mark (see declaration of conformity) | to EU Explosion Protection Directive (ATEX) |
| ATEX category gas | II 2G |
| ATEX category dust | II 2D |
| Explosion ignition protection type for gas | Ex h IIC T6...T3 Gb X |
| Explosion ignition protection type for dust | Ex h IIIC T85°C...T200°C Db X |
| Explosion ambient temperature | -50 to 60 °C |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
| Note on operating and pilot medium | lubricated operation possible (then required for further operation) |
| Corrosion resistance class CRC | 2 - moderate corrosion stress |
| Ambient temperature | -20 to 80 °C |
| Torque at nominal operating pressure and 0° swivel angle | 112.6 Nm |
| Torque at nominal operating pressure and 50° swivel angle | 61.9 Nm |
| Torque at nominal operating pressure and 90° swivel angle | 93.8 Nm |
| Air consumption at 6 bar per cycle 0°-90°-0° | 3.85 l |
| Product weight | 6800 g |
| Shaft connection | T22 |
| Pneumatic connection | G1/8 |
| Note on materials | RoHS compliant |
| Material cover | wrought aluminium alloy |
| Material seals | FKM, NBR, PUR |
| Material housing | wrought aluminium alloy |
| Material screws | high-alloy steel |
| Material shaft | high-alloy steel |
| Material number shaft | 1.4305 |
| Note on end-position adjustment | one end position adjustable as required |
| Supply pressure for spring set | 3.5 bar |
| Spring return torque at 0° swivel angle | 37.5 Nm |
| Spring return torque at 50° swivel angle | 28.1 Nm |
| Spring return torque at 90° swivel angle | 56.3 Nm |
| Spring set | 2 |
| Weight | 9 kg |
| Manufacturer | Festo |
| Hersteller-Nr | DAPS-0090-090-RS2-F0710-MW |
| EAN | 4052568256807 |
| Zolltarifnummer | 84123900 |
| GPSR Herstellerdaten | Festo Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
| Material | Aluminium |
| Thread | G 1/8 |
| Seal material | FKM, NBR, PUR |
| Medium | Compressed air |
| Function | single-acting |
| Actuation type | pneumatic |
| Norm | ISO 5211, VDI/VDE 3845 |
| Certification | ATEX |
| Operating conditions | ISO 8573-1 |
| Series | DAPS |
| Betriebsdruck max [bar] | 8.4 |
| Temperaturbereich | -20-80 °C |
| Temperature (max.) | 80 |
Downloads
Accessories
Quarter-turn actuator, single-acting, spring return, flange F07/F10, ATEX DAPS-0090-090-RS2-F0710 - Festo 533440
Item FES-533440
Quarter turn actuator, single-acting, spring return, size 0090, flange F07/F10 DAPS-0090-090-RS1-F0710-MW - Festo 8005030
Item FES-8005030Quarter turn actuator, single-acting, spring return, size 0090, flange F07/F10 DAPS-0090-090-RS3-F0710-MW - Festo 8005032
Item FES-8005032Quarter turn actuator, single-acting, spring return, size 0090, flange F07/F10 DAPS-0090-090-RS4-F0710-MW - Festo 8005033
Item FES-8005033Quarter turn actuator, single-acting, spring return, size 0090, flange F07/F10 DAPS-0090-090-RS4-F0710-T4 - Festo 8030618
Item FES-8030618Questions about this item
Any other question?
Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.