Images are examples, some edited with AI. The technical data are authoritative. AI notice
Quarter turn actuator, single-acting, spring return, size 0053, flange F05/F07 DAPS-0053-090-RS4-F0507-T4 - Festo 8030617
DAPS quarter turn actuator, single-acting with spring set, size 0053, flange pattern F05/F07 to ISO 5211. Air torque 26 to 53 Nm at nominal operating pressure, spring return torque 26 to 53 Nm. Approvals and rating: ATEX II 2G/2D, suitable up to SIL 2 Low Demand, CRC 3. Weight 3 kg.
- Specialist dealer since 2009
- Invoice payment for regular customers
- Worldwide shipping
- Technical questions clarified with the manufacturer
Description
For on/off valves with a safety position: the DAPS-0053-090-RS4-F0507-T4 is single-acting with spring return and reaches up to 53 Nm at nominal operating pressure. Flange pattern F05/F07 to ISO 5211 and shaft connection T17, depth 19.3 mm fit directly onto the valve top.
Benefits
- 26 to 53 Nm with compressed air at nominal operating pressure and 26 to 53 Nm from the spring set
- Safety position by spring force if air supply fails, operating pressure 5.6 to 8.4 bar
- Valve interface to ISO 5211: flange F05/F07, shaft connection T17
- Valve interface to VDI/VDE 3845 (NAMUR) for direct mounting of a solenoid valve
- For hazardous areas: ATEX II 2G and II 2D, ignition protection Ex h IIC T6...T3 Gb X
- Air consumption 2.1 l per switching cycle at 6 bar
Applications
Typical tasks are on/off actuation of ball valves, butterfly valves and plug valves with top flange F05/F07. The ATEX rating II 2G/2D allows the DAPS-0053-090-RS4-F0507-T4 to be installed in zones 1 and 2 as well as zones 21 and 22. The size 0053 DAPS is supplied with compressed air to ISO 8573-1:2010 [7:4:4] within 5.6 to 8.4 bar. The product weight is 3 kg.
Technical data
| Order code | DAPS-0053-090-RS4-F0507-T4 |
|---|---|
| Festo part number | 8030617 |
| Size of valve actuator | 0053 |
| Flange hole pattern | F05, F07 |
| Swivel angle | 90° |
| End-position adjustment range at 0° | -1 to 9° |
| Shaft connection depth | 19.3 mm |
| Fitting connection conforms to standard | ISO 5211 |
| Cushioning | no cushioning |
| Mounting position | any |
| Mode of operation | single-acting |
| Design | Scotch yoke |
| Position detection | none |
| Closing direction | closes to the right |
| Valve connection conforms to standard | VDI/VDE 3845 (NAMUR) |
| Safety Integrity Level (SIL) | product can be used in SRP/CS up to SIL 2 Low Demand, product can be used in SRP/CS up to SIL 2 High Demand |
| Operating pressure | 5.6 to 8.4 bar |
| CE mark (see declaration of conformity) | to EU Explosion Protection Directive (ATEX) |
| ATEX category gas | II 2G |
| ATEX category dust | II 2D |
| Explosion ignition protection type for gas | Ex h IIC T6...T3 Gb X |
| Explosion ignition protection type for dust | Ex h IIIC T85°C...T200°C Db X |
| Explosion ambient temperature | -20 to 150 °C |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
| Note on operating and pilot medium | lubricated operation possible (then required for further operation) |
| Corrosion resistance class CRC | 3 - high corrosion stress |
| Ambient temperature | -20 to 150 °C |
| Torque at nominal operating pressure and 0° swivel angle | 53 Nm |
| Torque at nominal operating pressure and 50° swivel angle | 26 Nm |
| Torque at nominal operating pressure and 90° swivel angle | 35 Nm |
| Note on torque | The operating torque of the actuator must not exceed the maximum permissible torque listed in ISO 5211 for the size of the mounting flange and coupling |
| Air consumption at 6 bar per cycle 0°-90°-0° | 2.1 l |
| Product weight | 3000 g |
| Shaft connection | T17 |
| Pneumatic connection | G1/8 |
| Note on materials | contains paint-wetting impairment substances (PWIS), RoHS compliant |
| Material cover | wrought aluminium alloy |
| Material seals | FKM, PTFE-reinforced |
| Material housing | wrought aluminium alloy |
| Material screws | high-alloy steel |
| Material shaft | high-alloy steel |
| Material number shaft | 1.4305 |
| End-position adjustment range at 90° | 81 to 91° |
| Note on end-position adjustment | one end position adjustable as required |
| Supply pressure for spring set | 5.6 bar |
| Spring return torque at 0° swivel angle | 35 Nm |
| Spring return torque at 50° swivel angle | 26 Nm |
| Spring return torque at 90° swivel angle | 53 Nm |
| Spring set | 4 |
| Weight | 3.1 kg |
| Manufacturer | Festo |
| Hersteller-Nr | DAPS-0053-090-RS4-F0507-T4 |
| EAN | 4052568280772 |
| Zolltarifnummer | 84123900 |
| GPSR Herstellerdaten | Festo Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
| Material | Aluminium |
| Thread | G 1/8 |
| Seal material | FKM, PTFE-reinforced |
| Medium | Compressed air |
| Function | single-acting |
| Actuation type | pneumatic |
| Norm | ISO 5211, VDI/VDE 3845 |
| Certification | ATEX |
| Operating conditions | ISO 8573-1 |
| Series | DAPS |
| Betriebsdruck max [bar] | 8.4 |
| Temperaturbereich | -20-150 °C |
| Temperature (max.) | 150 |
Downloads
Accessories
Quarter turn actuator, single-acting, spring return, size 0053, flange F05/F07 DAPS-0053-090-RS4-F0507-MW - Festo 8005029
Item FES-8005029Quarter-turn actuator, single-acting, spring return, flange F05/F07, ATEX DAPS-0053-090-RS4-F0507 - Festo 533438
Item FES-533438Quarter turn actuator, single-acting, spring return, size 0053, flange F05/F07 DAPS-0053-090-RS3-F0507-MW - Festo 8005028
Item FES-8005028Quarter turn actuator, single-acting, spring return, size 0053, flange F05/F07 DAPS-0053-090-RS2-F0507-MW - Festo 8005027
Item FES-8005027Quarter turn actuator, single-acting, spring return, size 0053, flange F05/F07 DAPS-0053-090-RS1-F0507-MW - Festo 8005026
Item FES-8005026Questions about this item
Any other question?
Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.