Images are examples, some edited with AI. The technical data are authoritative. AI notice
Quarter turn actuator, single-acting, spring return, size 0053, flange F05/F07 DAPS-0053-090-RS2-F0507-MW - Festo 8005027
The DAPS-0053-090-RS2-F0507-MW returns ball valves and butterfly valves with flange F05/F07 to ISO 5211 to their home position by spring force. The spring holds at least 16.5 Nm, with compressed air (5.6 bar) 36.3 to 66 Nm are available. Weight 4.5 kg.
- Specialist dealer since 2009
- Invoice payment for regular customers
- Worldwide shipping
- Technical questions clarified with the manufacturer
Description
For on/off valves with a safety position: the DAPS-0053-090-RS2-F0507-MW is single-acting with spring return and reaches up to 66 Nm at 5.6 bar. Mounting is via flange F05/F07 (ISO 5211) and shaft connection T17, depth 19.3 mm.
Benefits
- 36.3 to 66 Nm with compressed air (5.6 bar) and 16.5 to 33 Nm from the spring set
- Safety position by spring force if air supply fails, operating pressure 3.5 to 8.4 bar
- Valve interface to ISO 5211: flange F05/F07, shaft connection T17
- Valve interface to VDI/VDE 3845 (NAMUR) for direct mounting of a solenoid valve
- For hazardous areas: ATEX II 2G and II 2D, ignition protection Ex h IIC T6...T3 Gb X
- Corrosion resistance class CRC 2
Applications
It operates 90-degree valves with top flange F05/F07, for example ball valves or butterfly valves in pipelines. ATEX category II 2G/2D permits use of the DAPS-0053 in zones 1 and 2 as well as zones 21 and 22. The operating medium is compressed air to ISO 8573-1:2010 [7:4:4] within 3.5 to 8.4 bar, nominal pressure 5.6 bar. The product weight is 4.5 kg.
Technical data
| Order code | DAPS-0053-090-RS2-F0507-MW |
|---|---|
| Festo part number | 8005027 |
| Size of valve actuator | 0053 |
| Flange hole pattern | F05, F07 |
| Swivel angle | 92° |
| Shaft connection depth | 19.3 mm |
| Fitting connection conforms to standard | ISO 5211 |
| Cushioning | no cushioning |
| Mounting position | any |
| Mode of operation | single-acting |
| Design | Scotch yoke |
| Position detection | none |
| Closing direction | closes to the right |
| Valve connection conforms to standard | VDI/VDE 3845 (NAMUR) |
| Safety Integrity Level (SIL) | product can be used in SRP/CS up to SIL 2 Low Demand, product can be used in SRP/CS up to SIL 2 High Demand |
| Operating pressure | 3.5 to 8.4 bar |
| Nominal operating pressure | 5.6 bar |
| CE mark (see declaration of conformity) | to EU Explosion Protection Directive (ATEX) |
| ATEX category gas | II 2G |
| ATEX category dust | II 2D |
| Explosion ignition protection type for gas | Ex h IIC T6...T3 Gb X |
| Explosion ignition protection type for dust | Ex h IIIC T85°C...T200°C Db X |
| Explosion ambient temperature | -50 to 60 °C |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
| Note on operating and pilot medium | lubricated operation possible (then required for further operation) |
| Corrosion resistance class CRC | 2 - moderate corrosion stress |
| Ambient temperature | -20 to 80 °C |
| Torque at nominal operating pressure and 0° swivel angle | 66 Nm |
| Torque at nominal operating pressure and 50° swivel angle | 36.3 Nm |
| Torque at nominal operating pressure and 90° swivel angle | 55 Nm |
| Air consumption at 6 bar per cycle 0°-90°-0° | 2.1 l |
| Product weight | 4500 g |
| Shaft connection | T17 |
| Pneumatic connection | G1/8 |
| Note on materials | RoHS compliant |
| Material cover | wrought aluminium alloy |
| Material seals | FKM, NBR, PUR |
| Material housing | wrought aluminium alloy |
| Material screws | high-alloy steel |
| Material shaft | high-alloy steel |
| Material number shaft | 1.4305 |
| Note on end-position adjustment | one end position adjustable as required |
| Supply pressure for spring set | 3.5 bar |
| Spring return torque at 0° swivel angle | 22 Nm |
| Spring return torque at 50° swivel angle | 16.5 Nm |
| Spring return torque at 90° swivel angle | 33 Nm |
| Spring set | 2 |
| Weight | 5 kg |
| Manufacturer | Festo |
| Hersteller-Nr | DAPS-0053-090-RS2-F0507-MW |
| EAN | 4052568256760 |
| Zolltarifnummer | 84123900 |
| GPSR Herstellerdaten | Festo Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
| Material | Aluminium |
| Thread | G 1/8 |
| Seal material | FKM, NBR, PUR |
| Medium | Compressed air |
| Function | single-acting |
| Actuation type | pneumatic |
| Norm | ISO 5211, VDI/VDE 3845 |
| Certification | ATEX |
| Operating conditions | ISO 8573-1 |
| Series | DAPS |
| Betriebsdruck max [bar] | 8.4 |
| Temperaturbereich | -20-80 °C |
| Temperature (max.) | 80 |
Downloads
Accessories
Quarter-turn actuator, single-acting, spring return, flange F05/F07, ATEX DAPS-0053-090-RS2-F0507 - Festo 533436
Item FES-533436
Quarter turn actuator, single-acting, spring return, size 0053, flange F05/F07 DAPS-0053-090-RS1-F0507-MW - Festo 8005026
Item FES-8005026Quarter turn actuator, single-acting, spring return, size 0053, flange F05/F07 DAPS-0053-090-RS3-F0507-MW - Festo 8005028
Item FES-8005028Quarter turn actuator, single-acting, spring return, size 0053, flange F05/F07 DAPS-0053-090-RS4-F0507-MW - Festo 8005029
Item FES-8005029Quarter turn actuator, single-acting, spring return, size 0053, flange F05/F07 DAPS-0053-090-RS4-F0507-T4 - Festo 8030617
Item FES-8030617Questions about this item
Any other question?
Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.