Images are examples, some edited with AI. The technical data are authoritative. AI notice
CPX control block CODESYS V3 31 axes CPX-CEC-M1-V3 - Festo 3472765
The Festo CPX-CEC-M1-V3 control block is a PLC for the CPX terminal with 32 MB flash, 256 MB RAM, 800 MHz processor and programming in CODESYS provided by Festo. Protocols: CODESYS Level 2, EasyIP, Modbus TCP, TCP/IP. Programming languages to IEC 61131-3. Up to 31 axes via SoftMotion.
- Specialist dealer since 2009
- Invoice payment for regular customers
- Worldwide shipping
- Technical questions clarified with the manufacturer
Description
The Festo CPX-CEC-M1-V3 control block is a PLC for the CPX terminal with 32 MB flash, 256 MB RAM, 800 MHz processor and programming in CODESYS provided by Festo.
Key benefits
- 32 MB flash, 256 MB RAM, 800 MHz processor
- Programming languages to IEC 61131-3
- Up to 31 axes via SoftMotion
- Fieldbus and network connectivity: CODESYS Level 2, EasyIP, Modbus TCP, TCP/IP
- Processing time approximately 200 µs/1 k instruction
Typical applications
It controls valve terminals and up to 31 electric axes directly in the terminal, saving a separate controller.
Technical data
| Type | CPX-CEC-M1-V3 |
|---|---|
| Festo part number | 3472765 |
| Dimensions (W x L x H) | 50 mm x 107 mm x 55 mm |
| Device-specific diagnostics | Diagnostic memory, channel and module-oriented diagnostics, undervoltage/short circuit of modules |
| CPU data | 32 MB flash, 256 MB RAM, 800 MHz processor |
| Configuration support | CODESYS V3 |
| Parameterisation | CODESYS V3 |
| Total number of axes | 31 |
| Additional functions | Diagnostic functions, SoftMotion functions for electric drives |
| Operator controls | Rotary switch for RUN/STOP, DIL switch for CAN termination |
| Programming, user interface language | DE, EN |
| Programming, file handling support | Yes |
| Processing time | Approximately 200 µs/1 k instruction |
| Internal current consumption, operating voltage | Typically 85 mA |
| IP address setting | DHCP, via MMI, via CoDeSys |
| Function modules | CPX diagnostic status, copy CPX diagnostic trace, read CPX module diagnostics, and others |
| Flag | CoDeSys variable concept, 28 kB retentive data |
| Nominal operating voltage DC load voltage | 24 V, with pneumatics type Midi/Maxi: 21.6 to 26.4 V, with pneumatics type CPA: 20.4 to 26.4 V, with pneumatics type MPA: 18 to 30 V, without pneumatics: 18 to 30 V |
| Nominal operating voltage DC | 24 V |
| Power failure bridging | 10 ms |
| Programming software | CODESYS provided by Festo |
| Programming language | Instruction list (IL), ladder diagram (LD), to IEC 61131-3, sequential function chart, function block diagram, structured text, additionally CFC |
| Program memory | 16 MB user program |
| Corrosion resistance class CRC | 2 - Moderate corrosion stress |
| Storage temperature | -20 to 70 °C |
| Relative air humidity | 95%, Non-condensing |
| Degree of protection | IP65, IP67 |
| Ambient temperature | -5 to 50 °C |
| Product weight | 135 g |
| Ethernet, number | 1 |
| Ethernet, data transmission rate | 10/100 Mbit/s |
| Ethernet, supported protocols | TCP/IP, EasyIP, Modbus TCP |
| Ethernet, connector | RJ45, 8-pin, socket |
| Fieldbus interface, electrical isolation | Yes |
| Field bus interface, transmission rate | 125, 250, 500, 800, 1000 kbit/s, adjustable via software |
| Field bus, connection system | Sub-D, 9-pin, plug |
| Fieldbus interface | CAN bus |
| Protocol | CODESYS Level 2, EasyIP, Modbus TCP, TCP/IP |
| Control-Interface | CAN bus |
| Ethernet interface | RJ45 (socket, 8-pin) |
| LED display, bus-specific | TP: link/traffic |
| LED display, product-specific | ERR: PLC runtime error, M: modify/forcing active, PL: load supply, RUN: PLC status, SF: system fault, STOP: PLC status, PS: electronics supply, sensor supply |
| Note on materials | RoHS-compliant |
| Material housing | PC, reinforced PA |
| Weight | 0.21 kg |
| Manufacturer | Festo |
| Hersteller-Nr | CPX-CEC-M1-V3 |
| EAN | 4052568269760 |
| Zolltarifnummer | 85371091 |
| GPSR Herstellerdaten | Festo Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
| Material | Polyamide (PA) |
| Norm | DIN EN 61131-3 |
| Operating voltage | 24 V DC |
| Series | CPX |
| Protection rating | IP65 |
| Temperature (max.) | 50 |
Downloads
Accessories
Braking resistor 100 Ohm, 200 W nominal power CACR-LE2-100-W500 - Festo 1336615
Item FES-1336615Braking resistor 67 Ohm, 720 W nominal power CACR-KL2-67-W1800 - Festo 1336617
Item FES-1336617Braking resistor 33 Ohm, 1440 W nominal power CACR-KL2-33-W2400 - Festo 1336619
Item FES-1336619Memory card for motors and controllers CAMC-M-S-F10-V1 - Festo 1436343
Item FES-1436343Motor controller 9000 VA 400 V three-phase CMMP-AS-C15-11A-P3-M3 - Festo 3215473
Item FES-3215473Digital positioner double-acting 4 - 20 mA IP65 CMSX-P-S-C-U-F1-D-130-A - Festo 3929312
Item FES-3929312Show 4 more items
Digital positioner double-acting 4 - 20 mA IP65 CMSX-P-S-C-U-F1-D-50-A - Festo 3929313
Item FES-3929313Digital positioner double-acting 4 - 20 mA IP65 CMSX-P-S-C-U-F1-D-130-C - Festo 3929314
Item FES-3929314Digital positioner double-acting 4 - 20 mA IP65 CMSX-P-S-C-U-F1-D-50-C - Festo 3929315
Item FES-3929315Digital positioner single-acting 4 - 20 mA IP65 CMSX-P-S-C-U-F1-S-130-A - Festo 3929369
Item FES-3929369Questions about this item
Any other question?
Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.






