Images are examples, some edited with AI. The technical data are authoritative. AI notice
Digital positioner double-acting 4 - 20 mA IP65 CMSX-P-S-C-U-F1-D-130-C - Festo 3929314
With a setpoint signal of 0 - 10 V, 0 - 20 mA or 4 - 20 mA and 3 to 8 bar operating pressure, the Festo CMSX-P-S-C-U-F1-D-130-C positioner controls double-acting quarter-turn and linear actuators. Degree of protection IP65. Standard nominal flow rate 130 l/min.
Available
- Specialist dealer since 2009
- Invoice payment for regular customers
- Worldwide shipping
- Technical questions clarified with the manufacturer
Description
With a setpoint signal of 0 - 10 V, 0 - 20 mA or 4 - 20 mA and 3 to 8 bar operating pressure, the Festo CMSX-P-S-C-U-F1-D-130-C positioner controls double-acting quarter-turn and linear actuators.
Why choose it
- Setpoint signal 0 - 10 V, 0 - 20 mA, 4 - 20 mA
- Standard nominal flow rate 130 l/min
- Works in a pressure range of 3 to 8 bar
- Display: LCD display, with backlighting, 7-segment
- Degree of protection IP65
Areas of use
It is used on process valves with pneumatic actuators, set up via display and buttons.
Technical data
| Type | CMSX-P-S-C-U-F1-D-130-C |
|---|---|
| Festo part number | 3929314 |
| Design | Digital, electropneumatic positioner |
| Mode of operation | Double-acting |
| Safety-related design features | Safety position: pneumatic outputs closed |
| Mounting position | Any |
| Type of mounting | With accessories |
| Functional principle of measuring system | Potentiometer |
| Display | LCD display, with backlighting, 7-segment |
| Setting options | Via display and buttons |
| Size of dead zone | 0.5 to 10 % |
| Operating pressure | 3 to 8 bar |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
| Note on operating and pilot medium | Lubricated operation not possible |
| Standard nominal flow rate | 130 l/min |
| Pneumatic connection | G1/8 |
| Nominal operating voltage DC | 24 V |
| Operational voltage range DC | 21.6 to 26.4 V |
| Maximum current consumption | 600 mA |
| Reverse polarity protection | For operating voltage connections |
| Analogue inputs, signal range | 0 - 10 V, 0 - 20 mA, 4 - 20 mA |
| Analogue inputs, linearity error at 25 °C | 0.5% |
| Analogue inputs, temperature coefficient | less than 0.02 %FS/K |
| Analogue inputs, resolution | 16 bit |
| Analog inputs, overload protection | Yes |
| Analogue inputs, electrical isolation | No |
| Analogue outputs, signal range | 4 - 20 mA |
| Analogue outputs, maximum load resistance | ≤ 600 Ohm |
| Analogue outputs, linearity error at 25°C | 0.5% |
| Analogue outputs, temperature coefficient | less than 0.02 %FS/K |
| Analogue outputs, resolution | 12 bit |
| Analogue outputs, reverse polarity protection | Yes |
| Analog outputs, short circuit current rating | Yes |
| Analog outputs, overload protection | Yes |
| Analogue outputs, galvanic isolation | No |
| Characteristic for inputs | To IEC 61131-2, type 3 |
| Switching input | PNP, NPN |
| Digital inputs, reverse polarity protection | Yes |
| Digital inputs, electrical isolation | yes, optocoupler |
| Digital outputs, reverse polarity protection | Yes |
| Switching output | 3 x PNP or 3 x NPN, switchable |
| Digital outputs, output current | 100 mA |
| Digital outputs, short-circuit proof | Yes |
| Digital outputs, overload proof | Yes |
| Digital outputs, electrical isolation | yes, optocoupler |
| Electrical connection 1, function | Power supply, analogue output, analogue input, 2x digital input, 3x digital output, load power supply |
| Electrical connection 1, connection type | Terminal strip |
| Electrical connection 1, connector system | Screw terminal |
| Electrical connection 1, number of connections/cores | 14 |
| Electrical connection 1, tightening torque | 0.6 Nm |
| Electrical connection 1, conductor cross section | less than 1.5 mm² |
| Cable fitting | M20x1.5 electrical connection 1 |
| Permissible cable diameter | 7 to 13 mm electrical connection 1 |
| Maximum cable length | 30 m for electrical connection 1 |
| Ambient temperature | -5 to 60 °C |
| Storage temperature | -20 to 60 °C |
| Relative air humidity | 93 % |
| Degree of protection | IP65 |
| Shock resistance | Shock test with severity level 1 to FN 942017-5 and EN 60068-2-27, As per EN 60068-2-29 |
| Vibration resistance | Transport application test with severity level 2 to FN 942017-4 and EN 60068-2-6, As per EN 60068-2-6 |
| Pollution degree | 3 |
| Approval | RCM |
| CE mark (see declaration of conformity) | To EU EMC Directive, to EU RoHS Directive |
| Material housing | Reinforced PC |
| Material sight glass | PC |
| Material base plate | Anodised wrought aluminium alloy |
| Material shaft | High-alloy stainless steel |
| Material coupling | High-alloy stainless steel |
| Material screws | High-alloy stainless steel |
| Material seals | NBR |
| Material cable connection | PA |
| Material blanking plug | PA |
| Note on materials | RoHS-compliant |
| Product weight | 970 g |
| Dimensions (W x L x H) | 190 mm x 105 mm x 130 mm |
| Weight | 1.3 kg |
| Manufacturer | Festo |
| Hersteller-Nr | CMSX-P-S-C-U-F1-D-130-C |
| EAN | 4052568273767 |
| Zolltarifnummer | 90328100 |
| GPSR Herstellerdaten | Festo Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
| Material | PC-reinforced |
| Thread | G 1/8 |
| Seal material | NBR |
| Medium | Compressed air |
| Function | double-acting |
| Flow rate [l/min] | 130 |
| Norm | DIN EN 61131-2 |
| Operating conditions | EN 60068-2-27, EN 60068-2-29, EN 60068-2-6, ISO 8573-1 |
| Operating voltage | 24 V DC |
| Series | CMSX |
| Betriebsdruck max [bar] | 8 |
| Protection rating | IP65 |
| Temperaturbereich | -5-60 °C |
| Temperature (max.) | 60 |
Downloads
Accessories
Braking resistor 100 Ohm, 200 W nominal power CACR-LE2-100-W500 - Festo 1336615
Item FES-1336615Braking resistor 67 Ohm, 720 W nominal power CACR-KL2-67-W1800 - Festo 1336617
Item FES-1336617Braking resistor 33 Ohm, 1440 W nominal power CACR-KL2-33-W2400 - Festo 1336619
Item FES-1336619Memory card for motors and controllers CAMC-M-S-F10-V1 - Festo 1436343
Item FES-1436343Digital positioner double-acting 4 - 20 mA IP65 CMSX-P-S-C-U-F1-D-130-A - Festo 3929312
Item FES-3929312Digital positioner double-acting 4 - 20 mA IP65 CMSX-P-S-C-U-F1-D-50-A - Festo 3929313
Item FES-3929313Show 4 more items
Digital positioner double-acting 4 - 20 mA IP65 CMSX-P-S-C-U-F1-D-50-C - Festo 3929315
Item FES-3929315Digital positioner single-acting 4 - 20 mA IP65 CMSX-P-S-C-U-F1-S-130-A - Festo 3929369
Item FES-3929369Digital positioner single-acting 4 - 20 mA IP65 CMSX-P-S-C-U-F1-S-50-A - Festo 3929370
Item FES-3929370Digital positioner double-acting 4 - 20 mA IP65 CMSX-P-SE-C-U-F1-D-130-A - Festo 3929539
Item FES-3929539Questions about this item
Any other question?
Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.





