Images are examples, some edited with AI. The technical data are authoritative. AI notice
Solenoid valve 5/2-way monostable M7 CPE10-M1CH-5L-M7 - Festo 550223
Slim 5/2-way solenoid valve delivering 350 l/min at just 10 mm width, monostable. 24 V DC coil (1.28 W), IP65 and IP67. Pilot air is taken internally, operating pressure 3 to 8 bar, M7 supply port. Festo type CPE10-M1CH-5L-M7. Manual override: non-detenting, detenting with accessory.
- Specialist dealer since 2009
- Invoice payment for regular customers
- Worldwide shipping
- Technical questions clarified with the manufacturer
Description
The CPE10-M1CH-5L-M7 solenoid valve from the Festo CPE10 series switches up to 350 l/min standard nominal flow at a width of only 10 mm, valve function 5/2-way, monostable. The valve controls double-acting actuators and returns to its initial position via the pneumatic spring once the signal is removed.
Benefits
- 350 l/min standard nominal flow at just 10 mm width and 4 mm nominal size.
- Internal piloting from port 1 (M7), operating pressure 3 to 8 bar.
- The CPE10-M1CH-5L-M7 switches on in 16 ms and off in 20 ms.
- 24 V DC coil with 1.28 W, 100 % duty cycle, M8x1 plug, 4-pin, IP65 and IP67 with plug socket.
- Port assignment 1, 2, 3, 4 and 5 in M7, pilot ports M3.
- The CPE10 series meets CRC 2 and is vibration and shock tested to EN 60068-2-6 and EN 60068-2-27.
Application and mounting
Lines are connected to the M7 threaded ports and the CPE10-M1CH-5L-M7 is bolted through its through-holes, the mounting position can be chosen freely. The CPE10-M1CH-5L-M7 runs on compressed air to ISO 8573-1:2010 [7:4:4], lubricated operation is possible but must then be maintained.
Technical data
| Type | CPE10-M1CH-5L-M7 |
|---|---|
| Festo part number | 550223 |
| Valve function | 5/2-way, monostable |
| Type of actuation | electrical |
| Width | 10 mm |
| Standard nominal flow rate | 350 l/min |
| Operating pressure | 3 to 8 bar |
| Design | piston spool |
| Type of reset | pneumatic spring |
| Marine classification | see certificate |
| Degree of protection | IP65, IP67 with plug socket to IEC 60529 |
| Nominal size | 4 mm |
| Sealing principle | soft |
| Mounting position | any |
| Manual override | non-detenting, detenting with accessory |
| Type of piloting | piloted |
| Pilot air supply | internal |
| Flow direction | non-reversible |
| Valve position identification | label holder |
| Overlap | positive overlap |
| Switching time off | 20 ms |
| Switching time on | 16 ms |
| Duty cycle | 100 % |
| Maximum positive test pulse with 0 signal | 1200 µs |
| Maximum negative test pulse with 1 signal | 900 µs |
| Coil characteristics | 24 V DC, 1.28 W |
| Permissible voltage fluctuations | -15 % / +10 % |
| Operating medium | compressed air to ISO 8573-1:2010 [7:4:4] |
| Note on operating and pilot medium | lubricated operation possible (then required for all further operation) |
| Vibration resistance | transport application test with severity level 2 to FN 942017-4 and EN 60068-2-6 |
| Shock resistance | shock test with severity level 2 to FN 942017-5 and EN 60068-2-27 |
| Corrosion resistance class CRC | 2 - moderate corrosion stress |
| Medium temperature | -5 to 50 °C |
| Ambient temperature | -5 to 50 °C |
| Product weight | 56 g |
| Electrical connection | M8x1, 4-pin |
| Type of mounting | with through-hole |
| Pilot exhaust air port 82 | M3 |
| Pilot air port 12 | M3 |
| Pneumatic connection, port 1 | M7 |
| Pneumatic connection, port 2 | M7 |
| Pneumatic connection, port 3 | M7 |
| Note on materials | RoHS compliant |
| Seal material | NBR |
| Housing material | die-cast aluminium |
| Exhaust function | can be throttled |
| Pilot exhaust air port 84 | M3 |
| Pilot air port 14 | M3 |
| Pneumatic connection, port 4 | M7 |
| Pneumatic connection, port 5 | M7 |
| Maximum tightening torque, plug | 0.4 Nm |
| Weight | 0.065 kg |
| Manufacturer | Festo |
| Hersteller-Nr | CPE10-M1CH-5L-M7 |
| EAN | 4052568192068 |
| Zolltarifnummer | 84812090 |
| GPSR Herstellerdaten | Festo Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
| Material | Aluminium |
| Thread | M7 |
| Nominal size DN [mm] | 4 |
| Medium | Compressed air |
| Function | 5/2 monostable |
| Flow rate [l/min] | 350 |
| Actuation type | Electrical |
| Certification | IEC 60529 |
| Operating conditions | EN 60068-2-27, EN 60068-2-6, ISO 8573-1 |
| Operating voltage | 24 V DC |
| Series | CPE10 |
| Betriebsdruck max [bar] | 8 |
| Pneumatic connection | M7 |
| Protection rating | IP65 |
| Temperature (max.) | 50 |
Downloads
Accessories
Solenoid valve 5/3-way mid-position closed M7 CPE10-M1CH-5/3G-M7 - Festo 550227
Item FES-550227Solenoid valve 5/3-way mid-position closed M7 CPE10-M1CH-5/3GS-M7 - Festo 550228
Item FES-550228Solenoid valve 5/3-way mid-position exhausted M7 CPE10-M1CH-5/3E-M7 - Festo 550229
Item FES-550229Alternatives
Solenoid valve 3/2-way normally closed monostable M7 CPE10-M1BH-3GL-M7 - Festo 196915
Item FES-196915Questions about this item
Any other question?
Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.



