Images are examples, some edited with AI. The technical data are authoritative. AI notice
Solenoid valve 5/2-way bistable M7 CPE10-M1CH-5J-M7 - Festo 550225
The CPE10-M1CH-5J-M7 delivers 350 l/min standard nominal flow within 10 mm width as a 5/2-way valve, bistable. 24 V DC coil (1.28 W), IP65 and IP67. Internal pilot air, operating pressure 2.5 to 8 bar. Manual override: non-detenting, detenting with accessory.
- Specialist dealer since 2009
- Invoice payment for regular customers
- Worldwide shipping
- Technical questions clarified with the manufacturer
Description
10 mm width and 350 l/min flow: the CPE10-M1CH-5J-M7 from the Festo CPE10 series works as a 5/2-way valve, bistable. The bistable function holds the cylinder in position after a switching pulse, continuous energising is not required.
Benefits
- 350 l/min standard nominal flow at just 10 mm width and 4 mm nominal size.
- The pilot stage of the CPE10-M1CH-5J-M7 takes its air internally, operating pressure 2.5 to 8 bar.
- The CPE10-M1CH-5J-M7 changes over in 8 ms.
- The 24 V DC coil of the CPE10-M1CH-5J-M7 draws 1.28 W, 100 % duty cycle, connection M8x1 plug, 4-pin.
- IP65 and IP67 degree of protection with plug socket to IEC 60529.
- Pneumatic ports 1, 2, 3, 4 and 5 in M7, pilot air M3.
Application and mounting
Lines are connected to the M7 threaded ports and the CPE10-M1CH-5J-M7 is bolted through its through-holes, the mounting position can be chosen freely. The CPE10-M1CH-5J-M7 runs on compressed air to ISO 8573-1:2010 [7:4:4], lubricated operation is possible but must then be maintained.
Technical data
| Type | CPE10-M1CH-5J-M7 |
|---|---|
| Festo part number | 550225 |
| Valve function | 5/2-way, bistable |
| Type of actuation | electrical |
| Width | 10 mm |
| Standard nominal flow rate | 350 l/min |
| Operating pressure | 2.5 to 8 bar |
| Design | piston spool |
| Marine classification | see certificate |
| Degree of protection | IP65, IP67 with plug socket to IEC 60529 |
| Nominal size | 4 mm |
| Sealing principle | soft |
| Mounting position | any |
| Manual override | non-detenting, detenting with accessory |
| Type of piloting | piloted |
| Pilot air supply | internal |
| Flow direction | non-reversible |
| Valve position identification | label holder |
| Overlap | positive overlap |
| Duty cycle | 100 % |
| Maximum positive test pulse with 0 signal | 1200 µs |
| Maximum negative test pulse with 1 signal | 900 µs |
| Coil characteristics | 24 V DC, 1.28 W |
| Permissible voltage fluctuations | -15 % / +10 % |
| Operating medium | compressed air to ISO 8573-1:2010 [7:4:4] |
| Note on operating and pilot medium | lubricated operation possible (then required for all further operation) |
| Vibration resistance | transport application test with severity level 2 to FN 942017-4 and EN 60068-2-6 |
| Shock resistance | shock test with severity level 2 to FN 942017-5 and EN 60068-2-27 |
| Corrosion resistance class CRC | 2 - moderate corrosion stress |
| Medium temperature | -5 to 50 °C |
| Ambient temperature | -5 to 50 °C |
| Product weight | 68 g |
| Electrical connection | M8x1, 4-pin |
| Type of mounting | with through-hole |
| Pilot exhaust air port 82 | M3 |
| Pilot air port 12 | M3 |
| Pneumatic connection, port 1 | M7 |
| Pneumatic connection, port 2 | M7 |
| Pneumatic connection, port 3 | M7 |
| Note on materials | RoHS compliant |
| Seal material | NBR |
| Housing material | die-cast aluminium |
| Exhaust function | can be throttled |
| Pilot exhaust air port 84 | M3 |
| Pilot air port 14 | M3 |
| Pneumatic connection, port 4 | M7 |
| Pneumatic connection, port 5 | M7 |
| Changeover time | 8 ms |
| Maximum tightening torque, plug | 0.4 Nm |
| Weight | 0.075 kg |
| Manufacturer | Festo |
| Hersteller-Nr | CPE10-M1CH-5J-M7 |
| EAN | 4052568192082 |
| Zolltarifnummer | 84812090 |
| GPSR Herstellerdaten | Festo Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
| Material | Aluminium |
| Thread | M7 |
| Nominal size DN [mm] | 4 |
| Medium | Compressed air |
| Function | 5/2 bistable |
| Flow rate [l/min] | 350 |
| Actuation type | Electrical |
| Certification | IEC 60529 |
| Operating conditions | EN 60068-2-27, EN 60068-2-6, ISO 8573-1 |
| Operating voltage | 24 V DC |
| Series | CPE10 |
| Betriebsdruck max [bar] | 8 |
| Pneumatic connection | M7 |
| Protection rating | IP65 |
| Temperature (max.) | 50 |
Downloads
Accessories
Solenoid valve 5/3-way mid-position closed M7 CPE10-M1CH-5/3G-M7 - Festo 550227
Item FES-550227Solenoid valve 5/3-way mid-position closed M7 CPE10-M1CH-5/3GS-M7 - Festo 550228
Item FES-550228Solenoid valve 5/3-way mid-position exhausted M7 CPE10-M1CH-5/3E-M7 - Festo 550229
Item FES-550229Alternatives
Solenoid valve 3/2-way normally closed monostable M7 CPE10-M1BH-3GL-M7 - Festo 196915
Item FES-196915Questions about this item
Any other question?
Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.



