Images are examples, some edited with AI. The technical data are authoritative. AI notice
Servo drive 350 VA 230 V single-phase CMMT-AS-C2-3A-MP-S1 - Festo 8143163
With 2 A nominal current per phase and 350 VA nominal power, the Festo CMMT-AS-C2-3A-MP-S1 servo drive powers electric axes (single-phase 230 V AC). Protocol: TCP/IP. Nominal power 350 VA, peak power 1000 VA. 2 A nominal and 6 A peak current per phase for up to 2 s.
Available
- Specialist dealer since 2009
- Invoice payment for regular customers
- Worldwide shipping
- Technical questions clarified with the manufacturer
Description
With 2 A nominal current per phase and 350 VA nominal power, the Festo CMMT-AS-C2-3A-MP-S1 servo drive powers electric axes (single-phase 230 V AC).
Benefits
- Nominal power 350 VA, peak power 1000 VA
- 2 A nominal and 6 A peak current per phase for up to 2 s
- Mains connection single-phase 230 V AC
- Communication via TCP/IP
- Conforms to EN 61800-3, EN 61800-5-1, EN 61800-5-2, EN ISO 13849-1
Areas of use
For positioning tasks with up to 1000 VA peak power, the drive is integrated into the system via TCP/IP.
Technical data
| Type | CMMT-AS-C2-3A-MP-S1 |
|---|---|
| Festo part number | 8143163 |
| Type of mounting | Mounting plate, attached with screws |
| Mounting position | Open convection, vertical |
| Product weight | 1300 g |
| Display | Green/yellow/red LED |
| Operator controls | Optional: Operator unit CDSB |
| Conforms to standard | EN 61800-3, EN 61800-5-1, EN 61800-5-2, EN ISO 13849-1 |
| Based on standard | EN 50581, EN 60204-1, EN 61508-1, EN 61508-2, EN 61508-3, EN 61508-4, EN 61508-5, EN 61508-6, EN 61508-7, EN 61800-2, EN 62061 |
| Approval | RCM, German Technical Control Board (TÜV), c UL us - Listed (OL) |
| KC mark | KC-EMV |
| CE mark (see declaration of conformity) | To EU EMC Directive, to EC Machinery Directive, to EU Low Voltage Directive, to EU RoHS Directive |
| Certificate issuing authority | UL E331130, TÜV Rheinland 01/205/5640.00/18 |
| Storage temperature | -25 to 55 °C |
| Ambient temperature | 0 to 50 °C |
| Note on ambient temperature | Power must be reduced by 3% per °C at ambient temperatures above 40°C |
| UL ambient temperature | 0 to 40 °C |
| Relative air humidity | 5 - 90%, Non-condensing |
| Maximum installation height | 2000 m |
| Note on maximum installation height | Above 1000 m, power reduction of 1% per 100 m |
| Degree of protection | IP20 |
| Protection class | I |
| Overvoltage category | III |
| Pollution degree | 2 |
| Immunity to surge | 6 kV |
| Note on materials | Contains paint-wetting impairment substances (PWIS), RoHS-compliant |
| Phases of nominal operating voltage | Single phase |
| Nominal operating voltage AC | 230 V |
| Permissible voltage fluctuations | -20 % / +15 % |
| Input voltage range AC | 100 to 230 V |
| Mains frequency | 48 to 62 Hz |
| Nominal current, load supply | 2.8 A |
| Peak current load power supply | 8.4 A |
| Active PFC | No |
| Mains filter | Built in |
| System voltage to EN 61800-5-1 | 300 V |
| Maximum short circuit current rating of the mains | 100 kA |
| Mains types | TT, PN, IT |
| Nominal voltage load voltage DC | 320 V |
| Permissible range of load supply | -20 %/+15 % |
| Maximum intermediate circuit voltage DC | 395 V |
| Brake resistor, integrated | 100 Ohm |
| Pulse power, braking resistor | 1.6 kVA |
| Pulse energy for braking resistor | 230 Ws |
| Nominal power braking resistor (IEC) | 23 W |
| Brake resistor, external | 100 to 160 Ohm |
| Maximum continuous output of the external braking resistor (IEC) | 180 W |
| Nominal voltage for logic power supply DC | 24 V |
| Permissible range for logic voltage | ± 20 % |
| Current consumption of logic power supply without clamping brake | 0.5 A |
| Current consumption for logic supply with parking brake | 1.5 A |
| Maximum current consumption for logic supply, holding brake and I/O | 2.3 A |
| Output voltage range AC | 3x (0 to input) V |
| Nominal current per phase, effective | 2 A |
| Peak current per phase, effective | 6 A |
| Maximum peak current duration | 2 s |
| Nominal controller power | 350 VA |
| Peak power | 1000 VA |
| Output frequency | 0 to 599 Hz |
| Maximum length of motor cable without external mains filter | 25 m |
| Maximum output current of holding brake | 1 A |
| Maximum voltage drop from logic supply to brake output | 0.8 V |
| Number of inputs for motor temperature sensor | 1 |
| Controller operating mode | Autotuning, P position controller, PI velocity controller, setup mode, interpolating mode via fieldbus, cascade control, PI current controller for F or M, profile mode with record and direct mode, homing, synchronous modes |
| Operating mode | 2x input capture (x, v, F), 2x output trigger (x, v, F), 1x SYNC interface for encoder emulation or encoder input, 2x position encoder input, sampling rate 16 kHz, real-time data acquisition, field-oriented control, position resolution 24 bit/rev, PWM with 8 or 16 kHz, vector modulation with 3rd harmonic |
| Ethernet interface, function | Parameterisation and commissioning |
| Ethernet interface, protocol | TCP/IP |
| Weight | 1.7 kg |
| Manufacturer | Festo |
| Hersteller-Nr | CMMT-AS-C2-3A-MP-S1 |
| EAN | 4052568298678 |
| Zolltarifnummer | 85044085 |
| GPSR Herstellerdaten | Festo Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
| Norm | DIN EN 61131-2, DIN EN 61800-3, DIN EN 61800-5-1, DIN EN 61800-5-2 |
| Certification | DIN EN ISO 13849-1, EN 62061 |
| Operating voltage | 230 V AC |
| Protection rating | IP20 |
| Temperaturbereich | 0-50 °C |
| Temperature (max.) | 50 |
Downloads
Accessories
Braking resistor 100 Ohm, 200 W nominal power CACR-LE2-100-W500 - Festo 1336615
Item FES-1336615Braking resistor 67 Ohm, 720 W nominal power CACR-KL2-67-W1800 - Festo 1336617
Item FES-1336617Braking resistor 33 Ohm, 1440 W nominal power CACR-KL2-33-W2400 - Festo 1336619
Item FES-1336619Memory card for motors and controllers CAMC-M-S-F10-V1 - Festo 1436343
Item FES-1436343Motor controller 9000 VA 400 V three-phase CMMP-AS-C15-11A-P3-M3 - Festo 3215473
Item FES-3215473Motor controller 6000 VA 400 V three-phase CMMP-AS-C10-11A-P3-M0 - Festo 1622904
Item FES-1622904Show 2 more items
Motor controller 3000 VA 400 V three-phase CMMP-AS-C5-11A-P3-M0 - Festo 1622903
Item FES-1622903Motor controller 500 VA 230 V single-phase CMMP-AS-C2-3A-M0 - Festo 1622901
Item FES-1622901Questions about this item
Any other question?
Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.






