Images are examples, some edited with AI. The technical data are authoritative. AI notice
Motor Controller CMMP-AS-C10-11A-P3-M0 - Festo 1622904
Festo drive motor for precise, dynamic motion tasks in automation technology.
Net
excl. VAT
€2,994.92
Item
FES-1622904
Manufacturer no.
CMMP-AS-C10-11A-P3-M0
- Specialist dealer since 2009
- Invoice payment for regular customers
- Worldwide shipping
- Technical questions clarified with the manufacturer
Description
Festo drive motor for precise, dynamic motion tasks in automation technology. The key technical data of this genuine Festo article are listed below.
Technical data
| Fastening type | on connection plate<br>Permanently screwed |
|---|---|
| Product weight [g] | 3.800 |
| Display | Seven segment display |
| Permission | RCM mark<br>c UL us - Listed (OL) |
| CE certificate (see declaration of conformity) | acc. to EU-EMV Directive<br>acc. to EU Machine Directive<br>acc. to EU Low voltage Directive<br>acc. to EU-RoHS Directive |
| Bearing temperature [°C] | -25 to 70 |
| ambient temperature [°C] | 0 to 40 |
| Relative humidity | 0 - 90 % |
| Protection category | IP10<br>IP20 |
| Degree of contamination | 2 |
| Material information | LABS containing materials included<br>RoHs compliant |
| Phase nominal operating voltage | 3-phase |
| Nominal operating voltage AC [V] | 400 |
| Permitted voltage oscillations | ± 10 % |
| Network frequency [Hz] | 50 to 60 |
| Nominal current [A] | 11 |
| Network filter | integrated |
| Max. intermediate circuit voltage DC [V] | 560 |
| Braking resistance [Ohm] | 68 |
| Impulse power braking resistance [kVA] | 8,5 |
| Nominal voltage logic supply DC [V] | 24 |
| Permitted range logic voltage | ± 20 % |
| Power input logic supply without parking brake [A] | 1,00 |
| Output voltage range AC | 3x 0 - 360 V |
| Nominal output current [A] | 10,0 |
| Nominal current per phase, effective [A] | 10,0 |
| Peak current per phase, effective [A] | 20 |
| Max. peak current duration [s] | 5 |
| Nominal performance controller [VA] | 6.000 |
| Peak performance [VA] | 12.000 |
| Output frequency [Hz] | 0 to 1000 |
| Parameterising interface | USB<br>Ethernet<br>Parameterising and commissioning |
| Fieldbus coupling | CANopen<br>Modbus/TCP |
| Communication profile | DS301/DSP402 |
| Process coupling | I/O coupling<br>for 256 mobile sets |
| Max. fieldbus transfer rate [Mbit/s] | 1 |
| Bus connector | Sub-D<br>9 pin<br>Plug |
| Encoder output interface, properties | Resolution 16384 ppr |
| Encoder output interface, function | Actual value feedback via encoder signals for speed control mode<br>Target value for downstream switched slave actuator |
| Encoder input interface, properties | HIPERFACE<br>RS422<br>SINCOS<br>EnDat<br>3 phasige Encodersignale |
| Encoder input interface, function | In synchronous mode as a speed preset of the slave actuator<br>Encoder signal target speed value |
| Quantity digital logic inputs | 10 |
| Properties logic inputs | Freely configurable<br>Galvanically separated |
| Work area logic input [V] | 8 to 30 |
| Quantity digital logic outputs 24 V DC | 5 |
| Properties digital logic outputs | Galvanically separated<br>Partially freely configurable |
| Max. current digital logic outputs [mA] | 100 |
| Quantity analogue target value inputs | 2 |
| Properties target value inputs | Differential inputs<br>Configurable for speed<br>Configurable for current |
| Work area target value input | ± 10 V |
| Impedance target value input [kOhm] | 20 |
| Quantity analogue monitor outputs | 2 |
| Work area monitor outputs | ± 10 V |
| Resolution monitor outputs [Bit] | 9 |
| Properties monitor outputs | Short circuit proof |
| Certified awarding point | 01/205/5162.02/19<br>TÜV Rheinland |
| Safety function | Safe switched off torque (STO)<br>Safe stop 1 (SS1) |
| Safety Integrity Level (SIL) | Safe switched off torque (STO) / SIL 3 / SILCL 3 |
| Performance Level (PL) | Safe switched off torque (STO) / category 4 performance level e |
| Diagnose degree of coverage [%] | 97 |
| SFF Safe Failure Fraction [%] | 99,17 |
| Hardware error tolerance | 1 |
| Proof test interval [A] | 20 |
| Weight | 4.2 kg |
| Manufacturer | Festo |
| Hersteller-Nr | CMMP-AS-C10-11A-P3-M0 |
| EAN | 4052568243272 |
| Zolltarifnummer | 85044085 |
| GPSR Herstellerdaten | Festo Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
| Series | CMMP |
| Protection rating | IP10 |
| Temperature (max.) | 40 |
Downloads
Accessories
Show 3 more items
Questions about this item
Any other question?
Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.