5/3-way solenoid valve, closed centre, G 3/8, 1600 l/min, 115 V AC - YPC SF5303

Need a cylinder to stop mid-stroke and stay there? The YPC SF5303 closes off supply and both working lines in its centre position. When both coils drop out, the springs centre the spool. Flow in the outer positions is 1600 l/min. The 115 V AC coil draws 4.1 VA and is meant for 110 to 120 V control circuits, as common in machines built for the North American market.

Advantages

• Spring-centred position with all ports blocked, switching time 35 ms max at 5 bar.
• 32 mm valve width keeps valve banks narrow as well.
• Oil-free operation: no lubrication required, if lubricated use ISO VG32 oil.
• Spool and body in aluminium, NBR seals, pilot section in glass fibre reinforced polyamide.

Applications

• Stopping a cylinder in an intermediate position, for positioning or set-up.
• Machines with 110 to 120 V control voltage, also as a spare for export equipment.
• Holding loads when the control signal drops briefly.

Accessories and spare parts

The replacement solenoid coil for 115 V AC is available separately and can be changed without opening the pneumatic circuit. For banks of several valves YPC offers the MF5500 manifold with 2 to 12 stations and a common supply through G 3/8.