5/3-way solenoid valve, centre position exhausted, G 1/4", 12 V DC, 850 l/min, nominal size 4.8 mm

In cycled systems the nominal size decides how fast a cylinder starts. This 5/3-way solenoid valve works with a nominal size of 4.8 mm at connection G 1/4". It is switched with 12 V DC. The switching function is centre position exhausted. The materials are body and spool aluminium, seals NBR, pilot polyamide.

Advantages

• Connection G 1/4" and exhaust G 1/4", so the piping follows the existing line network.
• Control voltage tolerance plus/minus 10 percent, which makes short supply dips uncritical.
• Media oiled and non-oiled, filtered compressed air, so no separate treatment is needed.
• Flow rate of 850 l/min, so the connected actuator moves without the valve throttling it.
• Switching function centre position exhausted, so the rest position is clearly defined.

Applications

• Control of pneumatic flaps, gates and diverters in conveying equipment.
• Cycled feeding and clamping units in fixture building.
• Plants operated within the temperature range -5 to +60 °C.
• Replacement of a defective valve of the same type in existing machines.