Solenoid coil type T1, 12 V DC, 3 W, 9.3 mm armature bore, connector size 1 - E.MC

When the coil on a solenoid valve fails, only the coil is replaced and the valve stays in the line. This type T1 coil belongs to 3/2, 5/2 and 5/3-way solenoid valves, valves on manifold plates and electrically piloted 3/2-way shut-off valves G 1/4 to G 1/2 and runs on 12 V DC, power 3 W. The type letter in the valve data is what decides the choice.

Advantages

• Energy-saving version: 3 W at 12 V DC, 100 % duty cycle.
• Armature bore 9.3 mm bottom, 8.3 mm top, 28 mm between armature bores.
• Outer dimensions 22 x 31 x 28 mm, weight 80 g.
• Connector size 1, supplied with connector or cable.

Applications

• Replacing a faulty or burnt-out coil on 3/2, 5/2 and 5/3-way solenoid valves, valves on manifold plates and electrically piloted 3/2-way shut-off valves G 1/4 to G 1/2.
• Spare parts stock for systems with several valves using type T1 coils.
• Changing a type T1 valve to another control voltage, provided the valve is offered in that voltage.

Matching valves

Type T1 coils are available for 12 V DC, 24 V DC, 24 V AC and 230 V AC. They are intended as spare parts for valves whose data sheet specifies coil type T1. No warranty is given for use on other valves.