This 5/2-way push button valve switches compressed air by hand and therefore suits fixtures that are meant to work without a control system. The connection is G 1/2". The switching function is Detent. The operating pressure is stated as -0.95 to 12 bar. The materials are body and spool 1.4436, seals FKM.
Advantages
- Temperature range of -20 to +180 °C, which covers use in the machine room as well as outdoors.
- Connection G 1/2" and exhaust 2x G 1/2", so the piping follows the existing line network.
- Media oiled and non-oiled compressed air, non-toxic gases (50 µm), so no separate treatment is needed.
- Actuating force of 112 N, so a light ramp is enough to trip the valve.
- Pressure inlet possible at any port, which simplifies the piping.
Technical data
| Feature | Value |
|---|
| Function | Detent |
|---|
| Switching function | 5/2-way |
|---|
| Thread | G 1/2" |
|---|
| Exhaust thread | 2x G 1/2" |
|---|
| Flow rate [l/min] | 3500 |
|---|
| Actuating force at 10 bar [N] | 112 |
|---|
| Material body and spool | 1.4436 |
|---|
| Material seals | FKM |
|---|
| Temperature range | -20 to +180 °C |
|---|
| Operating pressure | -0.95 to 12 bar |
|---|
| Media | oiled and non-oiled compressed air, non-toxic gases (50 µm) |
|---|
| Pressure inlet | possible at any port |
|---|
| Panel mounting | Two nuts for panel mounting are included in the scope of delivery (hole diameter: 24 mm, max. panel thickness: 5 mm) |
|---|
Applications
- Replacement of a defective valve of the same type in existing machines.
- Control of double-acting cylinders with an air demand up to 3500 l/min.
- Sequencing of pneumatic axes with connection G 1/2" in handling equipment.
- Control of pneumatic flaps, gates and diverters in conveying equipment.