5/2-way solenoid valve, spring return, G 1/8", 620 l/min, 24 V AC, aluminium body

This 5/2-way solenoid valve with spring return is designed for double-acting cylinders that have to move back into a defined position once the control signal is switched off. Its flow rate of 620 l/min across five G 1/8" ports serves medium piston diameters at short cycle times. The working range covers 1.5 to 10 bar, and switching takes place at 24 V AC with a power draw of 4.1 VA. Body and spool are made of aluminium, the seals of NBR and the pilot housing of glass-fibre reinforced polyamide. Coil and plug are part of the delivery, so the valve can be wired without additional parts.

Advantages

• Spring return moves the cylinder back to its home position automatically when the voltage fails
• 620 l/min of flow through a compact G 1/8" port for short cycle times
• Switching time below 25 ms at an operating pressure of 5 bar
• Aluminium body with NBR seals, pilot section in glass-fibre reinforced polyamide
• Wide pressure range from 1.5 to 10 bar and temperatures from -10 to +60 °C
• Solenoid coil design M with connector size 1 fitted, voltage tolerance ± 10 %

Applications

• Double-acting cylinders in feed and clamping units
• Handling equipment where grippers return to a safe position after an emergency stop
• Cycling feed devices that require switching times under 25 ms
• Test and assembly stations running on 24 V AC control voltage
• Installations with a supply pressure varying between 1.5 and 10 bar