3/2-way solenoid valve, normally closed (NC), G 1/2, 3500 l/min, 12 V DC - YPC SF6601

With no signal this 3/2-way valve blocks the supply and exhausts the outlet. Only when the coil pulls in does air flow to the consumer, and 3500 l/min at G 1/2 is enough for large single-acting cylinders or a strong blow-off line. The 12 V DC coil suits battery-powered equipment and small controls running on a 12 V supply.

Advantages

• Normally closed, the consumer is safely exhausted on power loss.
• No lubricator needed: designed for non-lubricated air, use ISO VG32 if the air is oiled.
• 22 mm class F solenoid coil with 3-pin DIN connector, IP65, no polarity to observe.
• Body and spool in aluminium, NBR seals, pilot section in glass-fibre reinforced polyamide.

Applications

• Blow-off and cleaning air switched on only when needed.
• Switching the air supply to a machine section on and off.
• Single-acting cylinders with a large bore.

Accessories and spare parts

A matching replacement solenoid coil for 12 V DC is available separately and can be changed without opening the pneumatic circuit. Several valves can be grouped on SF6000 series manifolds with 2 to 10 stations, sharing a common G 1/2 supply and exhaust.

According to YPC the SF6000 series carries the CE mark and complies with RoHS.