Hydraulic hose assembly EN 853 2 SN, DN 8, M 16x1.5, pipe connection 10 L, DKO / CEL, 1.9 m

For replacing damaged lines of the same nominal size, this type 2 SN to EN 853 is available with DN 8, 315 bar and 1.9 m of length. It is connected through thread M 16x1.5 at the pipe connection 10 L. It is reinforced with two steel wire braids. The two ends carry different connection forms, so the assembly links two different mating points.

Benefits

• working pressure 315 bar at nominal size DN 8
• reinforcement of two steel wire braids to EN 853 2 SN
• temperature range -40 to +100 °C (briefly +120 °C)
• cut to 1.9 m and crimped at both ends, no assembly work of your own is needed
• cover resistant to ozone and weathering
• connecting thread M 16x1.5 for the pipe connection 10 L, DKO / CEL

Applications

It is fitted in lift tables, ramps and clamping devices as a flexible link between pipe ends. According to the data sheet hydraulic oils on a mineral oil basis, vacuum (max. -0.83 bar), water, lubricants and fuels are approved.

Standards and conformity

The hose is built to EN 853 as type 2 SN and reinforced with two steel wire braids.