Compressed air hose assembly EN 853 1 SN, DN 25, M 36x2, pipe connection 28 L, DKO / DKO, 1.2 m

For replacing damaged lines of the same nominal size, this type 1 SN to EN 853 is available with DN 25, 40 bar and 1.2 m of length. It is connected through thread M 36x2 at the pipe connection 28 L. It is reinforced with one steel wire braid. Both ends carry the same connection form, so the assembly can be fitted either way round.

Benefits

• working pressure 40 bar at nominal size DN 25
• reinforcement of one steel wire braid to EN 853 1 SN
• temperature range -40 to +100 °C (briefly +120 °C)
• cut to 1.2 m and crimped at both ends, no assembly work of your own is needed
• cover resistant to ozone and weathering
• connecting thread M 36x2 for the pipe connection 28 L, DKO / DKO

Applications

The assembly is called for on construction machinery and lifting gear whose cylinders and motors are supplied over fixed line lengths. According to the data sheet compressed air is approved.

Standards and conformity

The hose is built to EN 853 as type 1 SN and reinforced with one steel wire braid.