Hydraulic hose assembly EN 853 2 SN, DN 16, M 26x1.5, pipe connection 18 L, DKO / DKO, 3.2 m

With 250 bar working pressure and DN 16, this line to EN 853 of type 2 SN covers the run between two fixed connection points. The overall length is 3.2 m, the thread at the ends M 26x1.5, the pipe connection 18 L. The hose is reinforced with two steel wire braids. Both ends carry the same connection form, so the assembly can be fitted either way round.

Benefits

• working pressure 250 bar at nominal size DN 16
• reinforcement of two steel wire braids to EN 853 2 SN
• temperature range -40 to +100 °C (briefly +120 °C)
• cut to 3.2 m and crimped at both ends, no assembly work of your own is needed
• cover resistant to ozone and weathering
• connecting thread M 26x1.5 for the pipe connection 18 L, DKO / DKO

Applications

It is fitted in lift tables, ramps and clamping devices as a flexible link between pipe ends. According to the data sheet hydraulic oils on a mineral oil basis, vacuum (max. -0.83 bar), water, lubricants and fuels are approved.

Standards and conformity

The hose is built to EN 853 as type 2 SN and reinforced with two steel wire braids.