Hydraulic hose assembly EN 853 2 SN, DN 10, M 18x1.5, pipe connection 12 L, DKO / CEL, 1.3 m

The ready-assembled line of type 2 SN to EN 853 carries pressure up to 315 bar at a nominal size of DN 10. It is crimped to a length of 1.3 m and carries thread M 18x1.5 at the ends for the pipe connection 12 L. The reinforcement consists of two steel wire braids. The two ends carry different connection forms, so the assembly links two different mating points.

Benefits

• working pressure 315 bar at nominal size DN 10
• reinforcement of two steel wire braids to EN 853 2 SN
• temperature range -40 to +100 °C (briefly +120 °C)
• cut to 1.3 m and crimped at both ends, no assembly work of your own is needed
• cover resistant to ozone and weathering
• connecting thread M 18x1.5 for the pipe connection 12 L, DKO / CEL

Applications

It is used in maintenance as a replacement for damaged lines of the same nominal size. According to the data sheet hydraulic oils on a mineral oil basis, vacuum (max. -0.83 bar), water, lubricants and fuels are approved.

Standards and conformity

The hose is built to EN 853 as type 2 SN and reinforced with two steel wire braids.