2/2-way solenoid valve NC, directly operated, stainless steel 1.4401, G 1/4, DN 3, 0 to 10 bar, FKM, 24 V AC/DC, ATEX, with 3 m cable - Riegler 185495

Where a medium has to be released or shut off by a control signal, the 2/2-way solenoid valve MVA.14.ES.24V.F.BD.3.EX takes on the job. It operates in the range 0 to 10 bar at nominal size DN 3 and is directly operated.

Benefits

• NC function: it only opens while 24 V AC/DC is applied, at DN 3.
• ATEX version according to the manufacturer, observe the marking on the device for conditions of use.
• Switches from 0 bar: directly operated, no minimum pressure needed, operating pressure up to 10 bar.
• Internal parts in stainless steel, housing in stainless steel 1.4401 and seat in stainless steel, DN 3.
• FKM seal material for media from 0 to 90 °C at 0 to 10 bar.
• Electrics: 24 V AC/DC, cable, 3 m, degree of protection IP 65 (with connector socket fitted).

Applications

Because the coil system is separated from the medium by a diaphragm, the manufacturer rates the series for critical media as well. Check the resistance of housing and seal to the specific medium beforehand. Medium temperatures of 0 to 90 °C are permitted at an ambient of 0 to 55 °C. Driven at 24 V AC/DC, it suits controls that have to shut off on power failure.