Compressed air hose assembly EN 853 1 SN, DN 16, M 26x1.5, pipe connection 18 L, DKO / DKO, 2 m

Where a flexible link between two pipe ends is needed, this line to EN 853 of type 1 SN works with DN 16 and 40 bar. It measures 2 m, the connecting thread is M 26x1.5, the pipe connection 18 L. It is reinforced with one steel wire braid. Both ends carry the same connection form, so the assembly can be fitted either way round.

Benefits

• working pressure 40 bar at nominal size DN 16
• reinforcement of one steel wire braid to EN 853 1 SN
• temperature range -40 to +100 °C (briefly +120 °C)
• cut to 2 m and crimped at both ends, no assembly work of your own is needed
• cover resistant to ozone and weathering
• connecting thread M 26x1.5 for the pipe connection 18 L, DKO / DKO

Applications

It is fitted in lift tables, ramps and clamping devices as a flexible link between pipe ends. According to the data sheet compressed air is approved.

Standards and conformity

The hose is built to EN 853 as type 1 SN and reinforced with one steel wire braid.