Dowel pin DIN 6325 / ISO 8734, 2.0 x 10 mm, hardened and ground steel

The dowel pin fixes the position of two components relative to each other and takes up transverse forces and follows DIN 6325. The article is listed with a diameter of 2.0 mm. Material hardened and ground steel is listed for this version.

Benefits

• Diameter 2.0 mm to DIN 6325 for a tight fit in the reamed bore.
• Length 10 mm so that the pin reaches through both parts.
• Radius R 2.0 mm at the end face to DIN 6325.
• The dimensions L1 0.78 mm and L2 0.30 mm are laid down for this size.
• Hardened and ground, so the fit stays tight even after repeated assembly.

Applications

In jigs the pin with its 10 mm length takes over the positioning, while the screws only clamp.

Standards and conformity

Diameter 2.0 mm and length 10 mm comply with DIN 6325 and ISO 8734.