Dowel pin DIN 6325 / ISO 8734, 14.0 x 24 mm, hardened and ground steel

In use, the dowel pin fixes the position of two components relative to each other and takes up transverse forces. It is supplied with 14.0 mm diameter and 24 mm length. It is produced from hardened and ground steel.

Benefits

• Diameter 14.0 mm to DIN 6325 for a tight fit in the reamed bore.
• Length 24 mm so that the pin reaches through both parts.
• Radius R 16.0 mm at the end face to DIN 6325.
• The dimensions L1 3.80 mm and L2 2.00 mm are laid down for this size.
• Hardened and ground, so the fit stays tight even after repeated assembly.

Applications

In tool and mould making the pin of 14.0 mm diameter keeps two plate halves in position.

Standards and conformity

The version follows DIN 6325, the identical international standard being ISO 8734.