Socket head cap screw DIN 912 / ISO 4762, hex socket AF 5, M 6x80, stainless steel A2

This socket head cap screw to DIN 912 works with an M 6 thread, a length of 80 mm and an AF 5 hex socket in the head. At 10.0 mm head diameter and 6.0 mm head height the joint stays flat. The material is stainless steel A2.

Benefits

• The AF 5 hex socket transmits the tightening torque without wrench flats on the head.
• Head diameter 10.0 mm and head height 6.0 mm to DIN 912 fit into a cylindrical counterbore.
• A thread length of at least 24 mm over an overall length of 80 mm leaves a load bearing shank.
• Made of stainless steel A2 for joints where uncoated steel is not enough.
• Dimensions to DIN 912 and ISO 4762, therefore interchangeable with existing M 6 joints.

Applications

• Plants that are cleaned frequently
• Assemblies used outdoors
• Screw joints on housings and sheet metal
• Indoor assemblies exposed to moisture

Standards and conformity

The dimensions comply with DIN 912 and ISO 4762. Material and class are specified as stainless steel A2. Depending on the manufacturer, partially threaded items may also be supplied with the thread running nearly up to the head.