Socket head cap screw DIN 912 / ISO 4762, hex socket AF 5, M 6x35, stainless steel A4

The AF 5 hex socket in the cylindrical head lets this M 6x35 screw to ISO 4762 be fitted where no wrench can reach the side of the head. A head diameter of 10.0 mm and a head height of 6.0 mm keep the bearing face small. Made of stainless steel A4.

Benefits

• The AF 5 hex socket transmits the tightening torque without wrench flats on the head.
• Head diameter 10.0 mm and head height 6.0 mm to DIN 912 fit into a cylindrical counterbore.
• A thread length of at least 24 mm over an overall length of 35 mm leaves a load bearing shank.
• Made of stainless steel A4, one step above A2, for more aggressive surroundings.
• Dimensions to DIN 912 and ISO 4762, therefore interchangeable with existing M 6 joints.

Applications

• Plants that are cleaned frequently
• Assemblies used outdoors
• Screw joints on housings and sheet metal
• Water treatment and wet areas

Standards and conformity

The dimensions comply with DIN 912 and ISO 4762. Material and class are specified as stainless steel A4. Depending on the manufacturer, partially threaded items may also be supplied with the thread running nearly up to the head.