Socket head cap screw DIN 912 / ISO 4762, hex socket AF 12, M 14x60, stainless steel A2

This socket head cap screw to DIN 912 joins components with an M 14 thread over a length of 60 mm and is tightened through the AF 12 hex socket. At 21.0 mm head diameter and 14.0 mm head height the joint stays flat. The material is stainless steel A2.

Benefits

• The AF 12 hex socket transmits the tightening torque without wrench flats on the head.
• Head diameter 21.0 mm and head height 14.0 mm to DIN 912 fit into a cylindrical counterbore.
• A thread length of at least 40 mm over an overall length of 60 mm leaves a load bearing shank.
• Made of stainless steel A2 for joints where uncoated steel is not enough.
• Dimensions to DIN 912 and ISO 4762, therefore interchangeable with existing M 14 joints.

Applications

• Plants that are cleaned frequently
• Assemblies used outdoors
• Screw joints on housings and sheet metal
• Indoor assemblies exposed to moisture
• Load carrying joints on base plates

Standards and conformity

The dimensions comply with DIN 912 and ISO 4762. Material and class are specified as stainless steel A2. Depending on the manufacturer, partially threaded items may also be supplied with the thread running nearly up to the head.