Images are for illustration purposes only and may differ from the actual product. Some images have been generated or edited, in whole or in part, using artificial intelligence systems. The technical specifications in the product description are authoritative.
With the push-in fitting the joint is made at one point, a tube of 8 mm outside diameter meets the continuing line. FDA compliant version, Y design, tube diameter 8 mm.
Push-in fitting, Y design, FDA compliant version, tube 8 mm, POM, FDA compliant
FLUIDICS EQUIPMENT
Original product
Net price (excl. VAT)
€5.08
Item
FL-438975
Manufacturer no.
IQSY 80 FDA
Personal expert advice
Brand new
Specialist dealer since 2009
Original product
Worldwide shipping
Product data
Manufacturer no.IQSY 80 FDA
EAN4050571875411
Customs tariff number39174000
ConditionNew
Artikel
FL-438975
Frequently Bought Together
-
This Item:
€5.08
-
Push-in fitting, tee design, male thread M 3, tube 4 mm, nickel plated brass
€3.58
-
Straight weld-on stud coupling, tube 12 S (M20x1,5), phosphated steel
€5.00
Total price
The operating pressure reaches from -0.95 bar to 16 bar. The push-in fitting connects a tube of 8 mm outside diameter and the continuing line in doing so. The Y design splits the line into two outlets.
Benefits
- Approvals to NSF and ANSI 51 as well as 61, KTW, WRC, ACS are documented for the materials
- The seal in NBR is matched to the range from -0.95 bar to 16 bar
- The tube is pushed in without tools and released again over the release ring
- With tube diameter 8 mm the size is fixed, so no reworking of the line is required
- The operating pressure from -0.95 bar to 16 bar is released for this size
Technical data
| Material | POM, FDA compliant |
|---|---|
| Tube outside diameter | 8 mm |
| Operating pressure | -0.95 to 16 bar |
| Design version | FDA compliant version |
| Seal material | NBR |
| Media | lubricated and unlubricated compressed air, non hazardous gases and liquids, water, liquid foodstuffs, mild chemicals |
| Material approvals | NSF and ANSI 51 as well as 61, KTW, WRC, ACS |
Applications
Workshop distribution and service units, compressed air installation on machines and plants, water and cooling circuits, pneumatic cylinders and valve terminals.
Standards and conformity
The following approvals are documented for the materials used: NSF and ANSI 51 as well as 61, KTW, WRC, ACS.
| Weight | 0.011000 |
|---|---|
| Manufacturer | Fluidics equipment |
| Hersteller-Nr | IQSY 80 FDA |
| EAN | 4050571875411 |
| Zolltarifnummer | 39174000 |
| GPSR Herstellerdaten | A1-ESD equipment GmbH. Keldersstr. 15, DE-42697 Solingen, www.esd.equipment |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
Customers Who Bought This Item Also Bought
