Images are examples, some edited with AI. The technical data are authoritative. AI notice

Angled connector, for hose 8/6 mm, AF 12, nickel-plated brass - Riegler 110581

Riegler ✓ Original product Brand new Made in Italy

Angled connector, for hose 8/6 mm, AF 12, nickel-plated brass

Net
€2.57
excl. VAT
Item RGL-110581
Manufacturer no. 13.800-8
Question about this item
  • Specialist dealer since 2009
  • Invoice payment for regular customers
  • Worldwide shipping
  • Technical questions clarified with the manufacturer

Description

Angled connector, for hose 8/6 mm, AF 12, Working pressure max. 18 bar, nickel-plated brass

Standards and origin

  • Customs tariff number: 74122000
  • Country of origin: IT

About Union elbows

Elbow connectors turn a line through 90 degrees and save room where the hose itself can no longer be bent. They cover tube O.D. 4 to 12 mm, or hose I.D. 2 to 10 mm on the barbed versions. The 28 items range from plastic fittings for compressed air to stainless steel unions for aggressive media.

What matters when choosing

  • Tube O.D. 4 to 12 mm is the key dimension of the push-in fittings and the axis every configurator in this group is built on. On the barbed hose fittings the hose I.D. of 2 to 10 mm applies instead.
  • Material: nickel-plated brass, PA, polypropylene (PP), stainless steel 1.4404 or perfluoroalkoxy (PFA). Brass and PA cover ordinary compressed air work, stainless steel and PFA belong where the medium attacks.
  • Max. working pressure of 16 to 25 bar depending on version, max. operating pressure up to 18 bar. The figure varies widely inside the group, so read it off the individual item.
  • Negative pressure: min. operating pressure of -0.9 bar and min. working pressure of -0.98 bar show which fittings may also run in vacuum lines.
  • Operating temperature from -200 to 5 °C at the low end and 60 to 300 °C at the high end. That spread comes from the material mix, with PFA and stainless steel at the extremes and the plastic fittings in the middle.

Typical applications

  • Compressed air distribution on machines and assembly fixtures
  • Turning the supply line right at the cylinder port where space is tight
  • Aggressive liquids handled in stainless steel 1.4404 or PFA
  • Vacuum lines on handling and gripper units
  • Paint and coating plants that require silicone-free seals

Seals on the value line series are NBR and silicone-free, while bodies are nickel-plated brass, PA, polypropylene, stainless steel 1.4404 or PFA. Manufacturing takes place in Italy and Germany.

Technical data

Min. operating temperature-20 °C
Max. operating temperature300 °C
Max. working pressure18 bar
Materialnickel-plated brass
for hose I.D.6
for tube O.D.8 mm
L122.0 mm
a/f12 mm
Weight0.042 kg
ManufacturerRiegler
Hersteller-Nr13.800-8
EAN4047322025041
Zolltarifnummer74122000
GPSR HerstellerdatenRiegler & Co. KG, Schützenstraße 27, DE-72574 Bad Urach, www.riegler.de
ArtikelzustandNew
Artikel-AuthentizitätOriginal product
Country of ManufactureItaly
For hose OD [mm]8
For hose ID [mm]6
Working pressure max. [bar]18
Betriebsdruck max [bar]18
Temperature (max.)300

Downloads

Questions about this item

Any other question?

Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day. Ask a question

Customers Who Bought This Item Also Bought