Push-in fitting, elbow design, FDA compliant version, thread G 1/8", tube 5 mm, POM, FDA compliant

The push-in fitting brings the male thread G 1/8" and a tube of 5 mm outside diameter together. The operating pressure reaches from -0.95 bar to 16 bar. The elbow design turns the line by 90 degrees and saves installation length.

Benefits

• The operating pressure from -0.95 bar to 16 bar is released for this size
• POM, FDA compliant keeps the parts light and dimensionally stable in the range from -0.95 bar to 16 bar
• The change of direction by 90 degrees saves installation length ahead of the port
• Approvals to NSF and ANSI 51 as well as 61, KTW, WRC, ACS are documented for the materials
• The seal in NBR is matched to the range from -0.95 bar to 16 bar
• The tube is pushed in without tools and released again over the release ring

Applications

Pneumatic cylinders and valve terminals, control air lines inside the control cabinet, workshop distribution and service units, compressed air installation on machines and plants.

Standards and conformity

The following approvals are documented for the materials used: NSF and ANSI 51 as well as 61, KTW, WRC, ACS.