Push-in fitting, elbow design, FDA compliant version, thread G 1/4", tube 10 mm, POM, FDA compliant

This push-in fitting is designed for the male thread G 1/4" and a tube of 10 mm outside diameter. The part accepts the tube without tools and holds it by the gripping claws. The operating pressure reaches from -0.95 bar to 16 bar. The elbow design turns the line by 90 degrees and saves installation length.

Benefits

• With tube diameter 10 mm the size is fixed, so no reworking of the line is required
• The operating pressure from -0.95 bar to 16 bar is released for this size
• POM, FDA compliant keeps the parts light and dimensionally stable in the range from -0.95 bar to 16 bar
• The change of direction by 90 degrees saves installation length ahead of the port
• Approvals to NSF and ANSI 51 as well as 61, KTW, WRC, ACS are documented for the materials

Applications

Water and cooling circuits, pneumatic cylinders and valve terminals, control air lines inside the control cabinet, workshop distribution and service units.

Standards and conformity

The following approvals are documented for the materials used: NSF and ANSI 51 as well as 61, KTW, WRC, ACS.