Images are for illustration purposes only and may differ from the actual product. Some images have been generated or edited, in whole or in part, using artificial intelligence systems. The technical specifications in the product description are authoritative.
With the push-in fitting the joint is made at one point, a tube of 28 mm outside diameter meets the continuing line. Large design, elbow design, tube diameter 28 mm.
Push-in fitting, elbow design, large design, tube 28 mm, brass and POM
FLUIDICS EQUIPMENT
Original product
Net price (excl. VAT)
€21.53
Item
FL-020353
Manufacturer no.
IQSL 280
Personal expert advice
Brand new
Specialist dealer since 2009
Original product
Worldwide shipping
Product data
Manufacturer no.IQSL 280
EAN4050571379070
Customs tariff number39174000
ConditionNew
Artikel
FL-020353
Frequently Bought Together
-
This Item:
€21.53
-
Rotary tube fitting, straight design, thread G 1/8", tube 6x4 mm, nickel plated brass
€4.74
-
Cutting ring fitting, tee design, tube 12 L (M18x1.5), light series L, nickel plated brass
€12.45
Total price
This push-in fitting is designed for a tube of 28 mm outside diameter and the continuing line. The part accepts the tube without tools and holds it by the gripping claws. The material is brass and POM, the size is fixed at tube diameter 28 mm. The elbow design turns the line by 90 degrees and saves installation length.
Benefits
- The change of direction by 90 degrees saves installation length ahead of the port
- Approvals to NSF and ANSI 51 as well as 61, DVGW-W270, KTW are documented for the materials
- The tube is pushed in without tools and released again over the release ring
- The size 28 is clearly assigned and stays available for reordering
- With tube diameter 28 mm the size is fixed, so no reworking of the line is required
Technical data
| Material | brass and POM |
|---|---|
| Tube outside diameter | 28 mm |
| Design version | large design |
| Seal material | NBR |
| Media | lubricated and unlubricated compressed air, neutral gases, cold water |
| Material approvals | NSF and ANSI 51 as well as 61, DVGW-W270, KTW |
Applications
Pneumatic cylinders and valve terminals, control air lines inside the control cabinet, workshop distribution and service units, compressed air installation on machines and plants.
Standards and conformity
The following approvals are documented for the materials used: NSF and ANSI 51 as well as 61, DVGW-W270, KTW.
| Weight | 0.115000 |
|---|---|
| Manufacturer | Fluidics equipment |
| Hersteller-Nr | IQSL 280 |
| EAN | 4050571379070 |
| Zolltarifnummer | 39174000 |
| GPSR Herstellerdaten | A1-ESD equipment GmbH. Keldersstr. 15, DE-42697 Solingen, www.esd.equipment |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
Customers Who Bought This Item Also Bought
