Images are for illustration purposes only and may differ from the actual product. Some images have been generated or edited, in whole or in part, using artificial intelligence systems. The technical specifications in the product description are authoritative.
With the push-in fitting the joint is made at one point, a tube of 18 mm outside diameter meets the continuing line. Large design, elbow design, tube diameter 18 mm.
Push-in fitting, elbow design, large design, tube 18 mm, POM
FLUIDICS EQUIPMENT
Original product
Net price (excl. VAT)
€9.63
Item
FL-012107
Manufacturer no.
IQSL 180
Personal expert advice
Brand new
Specialist dealer since 2009
Original product
Worldwide shipping
Product data
Manufacturer no.IQSL 180
EAN4050571378691
Customs tariff number39174000
ConditionNew
Artikel
FL-012107
Frequently Bought Together
-
This Item:
€9.63
-
Adjustable elbow coupling with sealing cone, tube 42 L, zinc-plated steel without nut
€68.45
-
Tube fitting, tee design, male thread G 3/8", tube 15x9 mm, polypropylene
€71.33
Total price
The material is POM, the size is fixed at tube diameter 18 mm. The push-in fitting connects a tube of 18 mm outside diameter and the continuing line in doing so. The elbow design turns the line by 90 degrees and saves installation length.
Benefits
- The size 18 is clearly assigned and stays available for reordering
- With tube diameter 18 mm the size is fixed, so no reworking of the line is required
- The change of direction by 90 degrees saves installation length ahead of the port
- Approvals to NSF and ANSI 51 as well as 61, DVGW-W270, KTW are documented for the materials
- The tube is pushed in without tools and released again over the release ring
Technical data
| Material | POM |
|---|---|
| Tube outside diameter | 18 mm |
| Design version | large design |
| Seal material | NBR |
| Media | lubricated and unlubricated compressed air, neutral gases, cold water |
| Material approvals | NSF and ANSI 51 as well as 61, DVGW-W270, KTW |
Applications
Compressed air installation on machines and plants, pneumatic cylinders and valve terminals, control air lines inside the control cabinet, workshop distribution and service units.
Standards and conformity
The following approvals are documented for the materials used: NSF and ANSI 51 as well as 61, DVGW-W270, KTW.
| Weight | 0.033000 |
|---|---|
| Manufacturer | Fluidics equipment |
| Hersteller-Nr | IQSL 180 |
| EAN | 4050571378691 |
| Zolltarifnummer | 39174000 |
| GPSR Herstellerdaten | A1-ESD equipment GmbH. Keldersstr. 15, DE-42697 Solingen, www.esd.equipment |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
Customers Who Bought This Item Also Bought
