Swivel elbow coupling, full bore, G 3/8", tube 12 L, zinc-plated steel

This swivel coupling connects a tube at 90 degrees to a G male stud thread and can be aligned without narrowing the bore. The article is listed with a working pressure of 315 bar. The stated figures are male stud thread G 3/8" and tube outside diameter 12 L.

Benefits

• The full bore keeps the whole cross section open while the G 3/8" thread carries the joint.
• Tube 12 L belongs to the light series and sets the union nut and the cutting ring.
• The working pressure of 315 bar applies to the fully assembled coupling.
• The temperature range covers -40 to +120 °C.
• The version in zinc-plated steel sets the corrosion protection and the temperature limit of the joint.

Applications

On valve blocks and cylinders it takes the line around the corner at 315 bar without throttling the flow.