Swivel elbow coupling, full bore, G 1", tube 25 S, stainless steel 1.4571 without nut

Once installed, the swivel coupling connects a tube at 90 degrees to a G male stud thread and can be aligned without narrowing the bore. The article is listed with a working pressure of 250 bar. The stated figures are male stud thread G 1" and tube outside diameter 25 S.

Benefits

• The full bore keeps the whole cross section open while the G 1" thread carries the joint.
• Tube 25 S belongs to the heavy series and sets the union nut and the cutting ring.
• The working pressure of 250 bar applies to the fully assembled coupling.
• The temperature range covers -60 to +400 °C.
• The version in stainless steel 1.4571, without nut and cutting ring sets the corrosion protection and the temperature limit of the joint.

Applications

On valve blocks and cylinders it takes the line around the corner at 250 bar without throttling the flow.