Swivel elbow coupling, full bore, G 1/4", tube 6 S, stainless steel 1.4571 without nut

The swivel coupling connects a tube at 90 degrees to a G male stud thread and can be aligned without narrowing the bore. The data state a working pressure of 400 bar. This version is listed with male stud thread G 1/4" and tube outside diameter 6 S. The stated material is stainless steel 1.4571, without nut and cutting ring.

Benefits

• The full bore keeps the whole cross section open while the G 1/4" thread carries the joint.
• Tube 6 S belongs to the heavy series and sets the union nut and the cutting ring.
• The working pressure of 400 bar applies to the fully assembled coupling.
• The temperature range covers -60 to +400 °C.
• The version in stainless steel 1.4571, without nut and cutting ring sets the corrosion protection and the temperature limit of the joint.

Applications

In plant construction the version in stainless steel 1.4571, without nut and cutting ring joins tight ports where there is no room for a tube bend.