Swivel elbow coupling, full bore, G 1/4", tube 6 S, stainless steel 1.4571

Once installed, the swivel coupling connects a tube at 90 degrees to a G male stud thread and can be aligned without narrowing the bore. The article is listed with a working pressure of 400 bar. This version is listed with male stud thread G 1/4" and tube outside diameter 6 S. Material stainless steel 1.4571 is listed for this version.

Benefits

• The full bore keeps the whole cross section open while the G 1/4" thread carries the joint.
• Tube 6 S belongs to the heavy series and sets the union nut and the cutting ring.
• The working pressure of 400 bar applies to the fully assembled coupling.
• The temperature range covers -60 to +400 °C.
• The version in stainless steel 1.4571 sets the corrosion protection and the temperature limit of the joint.

Applications

On valve blocks and cylinders it takes the line around the corner at 400 bar without throttling the flow.