Swivel elbow coupling, full bore, G 1-1/4", tube 35 L, zinc-plated steel without nut

Once installed, the swivel coupling connects a tube at 90 degrees to a G male stud thread and can be aligned without narrowing the bore. It is produced from zinc-plated steel, without nut and cutting ring. The data give male stud thread G 1-1/4" and tube outside diameter 35 L.

Benefits

• The full bore keeps the whole cross section open while the G 1-1/4" thread carries the joint.
• Tube 35 L belongs to the light series and sets the union nut and the cutting ring.
• The working pressure of 160 bar applies to the fully assembled coupling.
• The temperature range covers -40 to +120 °C.
• The version in zinc-plated steel, without nut and cutting ring sets the corrosion protection and the temperature limit of the joint.

Applications

On valve blocks and cylinders it takes the line around the corner at 160 bar without throttling the flow.