Angle bulkhead coupling 8 S (M16x1.5), M 16x1.5, zinc-plated steel, no nut or cutting ring

This angle bulkhead coupling takes a pipe run at a right angle through a vessel or bulkhead wall and seals it there with the cutting ring. The article is listed with a working pressure of 630 bar. This version is listed with tube diameter 8 S (M16x1.5), bulkhead thread M 16x1.5 and a version without nut and cutting ring. The stated material is zinc-plated steel.

Benefits

• Tube diameter 8 S (M16x1.5) at a working pressure of 630 bar.
• Bulkhead thread M 16x1.5 for passing through wall thicknesses up to the length of the thread.
• Temperature range -40 to +120 °C as per the data sheet.
• Material zinc-plated steel, heavy series.
• When tightened the cutting ring bites into the tube and keeps the joint tight up to 630 bar.

Applications

In control cabinet and machine building the feed-through gathers lines up to 630 bar at one wall.