Angle bulkhead coupling 30 S (M42x2), M 42x2, zinc-plated steel, no nut or cutting ring

Once installed, the angle bulkhead coupling takes a pipe run at a right angle through a vessel or bulkhead wall and seals it there with the cutting ring. This version is listed with tube diameter 30 S (M42x2), bulkhead thread M 42x2 and a version without nut and cutting ring. Its rating is a working pressure of 400 bar.

Benefits

• Tube diameter 30 S (M42x2) at a working pressure of 400 bar.
• Bulkhead thread M 42x2 for passing through wall thicknesses up to the length of the thread.
• Temperature range -40 to +120 °C as per the data sheet.
• Material zinc-plated steel, heavy series.
• When tightened the cutting ring bites into the tube and keeps the joint tight up to 400 bar.

Applications

On mobile working machines the wall feed-through stays tight over -40 to +120 °C.