Angle bulkhead coupling 16 S (M24x1.5), M 24x1.5, zinc-plated steel, no nut or cutting ring

In use, the angle bulkhead coupling takes a pipe run at a right angle through a vessel or bulkhead wall and seals it there with the cutting ring. It is produced from zinc-plated steel. The data give tube diameter 16 S (M24x1.5), bulkhead thread M 24x1.5 and a version without nut and cutting ring.

Benefits

• Tube diameter 16 S (M24x1.5) at a working pressure of 400 bar.
• Bulkhead thread M 24x1.5 for passing through wall thicknesses up to the length of the thread.
• Temperature range -40 to +120 °C as per the data sheet.
• Material zinc-plated steel, heavy series.
• When tightened the cutting ring bites into the tube and keeps the joint tight up to 400 bar.

Applications

On mobile working machines the wall feed-through stays tight over -40 to +120 °C.