Cutting ring elbow fitting, tube 38 S (M52x2), zinc-plated steel, no nut or cutting ring

Once installed, the cutting ring elbow fitting connects two pipe runs at a right angle, tight and detachable. This version is listed with tube diameter 38 S (M52x2). Decisive for the selection is a working pressure of 315 bar. In addition the data give the heavy series.

Benefits

• Designed for a tube diameter of 38 S (M52x2) in the heavy series version.
• Working pressure up to 315 bar as per the data sheet.
• Temperature range -40 to +120 °C for material zinc-plated steel.
• Detachable connection made by the cutting ring and the union nut.
• A reinforcing sleeve is provided for thin-walled or soft tubes.

Applications

In hydraulics the fitting branches a line of 38 S (M52x2) at a right angle and withstands 315 bar.