Images are for illustration purposes only and may differ from the actual product. Some images have been generated or edited, in whole or in part, using artificial intelligence systems. The technical specifications in the product description are authoritative.
The hose connector saves an intermediate construction because a tube of 4x2 mm and the continuing line meet directly. Tube 4x2 mm, elbow design, material polypropylene.
Hose connector, elbow design, tube 4x2 mm, polypropylene, temperature range from 0 °C to +80 °C
SANG-A
Original product
Net price (excl. VAT)
€3.67
Item
FL-591921
Manufacturer no.
WCK 2 PP E
Personal expert advice
Brand new
Specialist dealer since 2009
Original product
Worldwide shipping
Product data
Manufacturer no.WCK 2 PP E
EAN4050571935177
Customs tariff number39174000
ConditionNew
Artikel
FL-591921
Frequently Bought Together
-
This Item:
€3.67
-
Polyamide tube PA, diameter 4 x 2.7 mm, natural, cut length from a 50 m roll
€0.66
-
Push-in fitting, elbow design, male thread G 1/8", tube 4 mm, nickel plated brass
€4.92
Total price
The hose connector accepts a tube of 4x2 mm and the continuing line. The part is pushed into the hose and secured there. The temperature range reaches from 0 °C to +80 °C. The elbow design turns the line by 90 degrees and saves installation length.
Benefits
- The change of direction by 90 degrees saves installation length ahead of the port
- Approvals to FDA are documented for the materials
- The seal in FKM is matched to the range from 0 °C to +80 °C
- The barb is pushed into the hose and needs no thread on the component
Technical data
| Material | polypropylene |
|---|---|
| Tube diameter (outside x inside) | 4x2 mm |
| Temperature range | 0 to +80 °C |
| Seal material | FKM |
| Media | lubricated and unlubricated compressed air, neutral liquids and gases, water, also demineralised, many chemicals |
| Material approvals | FDA |
Applications
Laboratory equipment and test setups, repair of damaged hose runs, hose connections in water and air lines, laboratory and chemical plants.
Standards and conformity
The following approvals are documented for the materials used: FDA.
| Weight | 0.003300 |
|---|---|
| Manufacturer | Sang-A |
| Hersteller-Nr | WCK 2 PP E |
| EAN | 4050571935177 |
| Zolltarifnummer | 39174000 |
| GPSR Herstellerdaten | A1-ESD equipment GmbH. Keldersstr. 15, DE-42697 Solingen, www.esd.equipment |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
| Material | Polypropylene |
| Schlauchdurchmesser (außen x innen) [mm] | 4x2 |
| Temperaturbereich | 0-80 °C |
Customers Who Bought This Item Also Bought
