Everis LQ2 non-spill elbow coupling body, 1/4" locking hose barb, chrome-plated brass, EPDM, blue - CPC LQ2D3304LBLU

Where a straight fitting would need too much height, this elbow coupling body turns the hose to the side. It is hose mounted on a 1/4" locking barb and disconnects without drips, with CPC specifying less than 0.015 cc per disconnect at 0 psi. The body is chrome-plated brass.

Use in the data center

A typical location is the supply line to a cold plate in a low-profile server tray, where the hose has to bend right after the coupling. Blue marks the cold side and helps assign lines correctly when connecting. For maintenance the hose is separated at the coupling while the loop stays filled.

Benefits

• Elbow design: The angled outlet saves height in tight enclosures.
• Secure hose joint: CPC states the locking barb works with various tubing, including reinforced tubing.
• No drips on disconnect: Even at 200 psi spillage stays below 0.063 cc.
• Pressure and temperature: Rated for vacuum to 13.8 bar and -17 to 115 °C.
• Low pressure drop: High flow relative to size supports efficient cooling.

Packing unit

Packing unit: 10 pcs. Price per piece, ordered in steps of 10 pcs.

Datasheet

The Everis LQ2 series datasheet is available under Downloads.