Compression fitting, elbow design, male thread R 3/8", tube 10 (M16x1.5) mm, brass, -60 bis +300 °C

This compression fitting is designed for the male thread R 3/8" and a tube of 10 (M16x1.5) mm outside diameter. The part presses the clamping ring onto the tube as the union nut is tightened. The operating pressure reaches up to 95 bar with hard copper tube. The elbow design turns the line by 90 degrees and saves installation length.

Benefits

• With tube diameter 10 (M16x1.5) mm the size is fixed, so no reworking of the line is required
• The operating pressure up to 95 bar with hard copper tube is released for this size
• The temperature range from -60 °C to +300 °C covers cold installation and warm machine surroundings
• Brass as material covers the released range from -60 °C to +300 °C
• The change of direction by 90 degrees saves installation length ahead of the port

Applications

Lubrication and cooling lines on machine tools, measuring lines and pressure gauge connections, maintenance of existing pipework, copper pipework in plants and buildings.

Standards and conformity

The brass compression fittings cannot be combined with cutting ring tube fittings to ISO 8434-1, formerly DIN 2353.