Compression fitting, elbow design, male thread R 1/2", tube 16 (M22x1.5) mm, brass

The operating pressure reaches up to 76 bar with hard copper tube. The compression fitting connects the male thread R 1/2" and a tube of 16 (M22x1.5) mm outside diameter in doing so. The elbow design turns the line by 90 degrees and saves installation length.

Benefits

• Brass as material covers the released range from -60 °C to +300 °C
• The change of direction by 90 degrees saves installation length ahead of the port
• The clamping ring can be drawn on safely even on soft copper tube
• The connection over male thread R 1/2" is fixed in size and needs no adaptor
• With tube diameter 16 (M22x1.5) mm the size is fixed, so no reworking of the line is required

Applications

Copper pipework in plants and buildings, lubrication and cooling lines on machine tools, measuring lines and pressure gauge connections, maintenance of existing pipework.

Standards and conformity

The brass compression fittings cannot be combined with cutting ring tube fittings to ISO 8434-1, formerly DIN 2353.