Compression fitting, elbow design, male thread G 3/4", tube 22 (M30x1.5) mm, brass, -20 bis +80 °C

This compression fitting joins the male thread G 3/4" and a tube of 22 (M30x1.5) mm outside diameter in one part. The operating pressure reaches up to 54 bar with hard copper tube. The elbow design turns the line by 90 degrees and saves installation length.

Benefits

• The change of direction by 90 degrees saves installation length ahead of the port
• The seal in polyamide is matched to the range from -20 °C to +80 °C
• The clamping ring can be drawn on safely even on soft copper tube
• The connection over male thread G 3/4" is fixed in size and needs no adaptor
• With tube diameter 22 (M30x1.5) mm the size is fixed, so no reworking of the line is required
• The operating pressure up to 54 bar with hard copper tube is released for this size

Applications

Copper pipework in plants and buildings, lubrication and cooling lines on machine tools, measuring lines and pressure gauge connections, maintenance of existing pipework.

Standards and conformity

The brass compression fittings cannot be combined with cutting ring tube fittings to ISO 8434-1, formerly DIN 2353.